Attachment 11402 Details for Bug 25859 – Full output of smartctl

Full output of smartctl

smart-ssd-pny.txt (text/plain), 5.54 KB, created by Pierre Jarillon on 2019-12-13 00:25:35 CET

(hide)

Description:

Filename:

MIME Type:

Creator: Pierre Jarillon

Created: 2019-12-13 00:25:35 CET

Size: 5.54 KB

patch

obsolete

>smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.13-desktop-2.mga7] (local build)
>Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
>
>=== START OF INFORMATION SECTION ===
>Device Model:     PNY CS900 240GB SSD
>Serial Number:    PNY0719000352010883A
>LU WWN Device Id: 5 f8db4c 07190883a
>Firmware Version: CS900613
>User Capacity:    240â¯057â¯409â¯536 bytes [240 GB]
>Sector Size:      512 bytes logical/physical
>Rotation Rate:    Solid State Device
>Form Factor:      2.5 inches
>Device is:        Not in smartctl database [for details use: -P showall]
>ATA Version is:   ACS-4 (minor revision not indicated)
>SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
>Local Time is:    Fri Dec 13 00:20:04 2019 CET
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x00)	Offline data collection activity
>					was never started.
>					Auto Offline Data Collection: Disabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		(65535) seconds.
>Offline data collection
>capabilities: 			 (0x79) SMART execute Offline immediate.
>					No Auto Offline data collection support.
>					Suspend Offline collection upon new
>					command.
>					Offline surface scan supported.
>					Self-test supported.
>					Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   2) minutes.
>Extended self-test routine
>recommended polling time: 	 (  30) minutes.
>Conveyance self-test routine
>recommended polling time: 	 (   6) minutes.
>
>SMART Attributes Data Structure revision number: 16
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
>  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       6052
> 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -       5
>168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       0
>170 Unknown_Attribute       0x0003   100   100   010    Pre-fail  Always       -       63
>173 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       720927
>192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       1
>194 Temperature_Celsius     0x0023   067   067   000    Pre-fail  Always       -       33 (Min/Max 33/33)
>218 Unknown_Attribute       0x000b   100   100   050    Pre-fail  Always       -       0
>231 Temperature_Celsius     0x0013   100   100   000    Pre-fail  Always       -       99
>241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       1221
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
># 1  Extended offline    Completed without error       00%      5912         -
># 2  Extended offline    Completed without error       00%      5743         -
># 3  Extended offline    Completed without error       00%      5576         -
># 4  Extended offline    Completed without error       00%      5408         -
># 5  Extended offline    Completed without error       00%      5240         -
># 6  Extended offline    Completed without error       00%      5072         -
># 7  Extended offline    Completed without error       00%      4903         -
># 8  Extended offline    Completed without error       00%      4735         -
># 9  Extended offline    Completed without error       00%      4566         -
>#10  Extended offline    Completed without error       00%      4399         -
>#11  Extended offline    Completed without error       00%      4230         -
>#12  Extended offline    Completed without error       00%      4063         -
>#13  Extended offline    Completed without error       00%      3895         -
>#14  Extended offline    Completed without error       00%      3726         -
>#15  Extended offline    Completed without error       00%      3558         -
>#16  Extended offline    Completed without error       00%      3390         -
>#17  Extended offline    Completed without error       00%      3222         -
>#18  Extended offline    Completed without error       00%      3054         -
>#19  Extended offline    Completed without error       00%      2886         -
>#20  Extended offline    Completed without error       00%      2719         -
>#21  Extended offline    Completed without error       00%      2550         -
>
>SMART Selective self-test log data structure revision number 0
>Note: revision number not 1 implies that no selective self-test has ever been run
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.13-desktop-2.mga7] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     PNY CS900 240GB SSD
Serial Number:    PNY0719000352010883A
LU WWN Device Id: 5 f8db4c 07190883a
Firmware Version: CS900613
User Capacity:    240â¯057â¯409â¯536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Dec 13 00:20:04 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(65535) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.
Conveyance self-test routine
recommended polling time: 	 (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       6052
 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -       5
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       0
170 Unknown_Attribute       0x0003   100   100   010    Pre-fail  Always       -       63
173 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       720927
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       1
194 Temperature_Celsius     0x0023   067   067   000    Pre-fail  Always       -       33 (Min/Max 33/33)
218 Unknown_Attribute       0x000b   100   100   050    Pre-fail  Always       -       0
231 Temperature_Celsius     0x0013   100   100   000    Pre-fail  Always       -       99
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       1221

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      5912         -
# 2  Extended offline    Completed without error       00%      5743         -
# 3  Extended offline    Completed without error       00%      5576         -
# 4  Extended offline    Completed without error       00%      5408         -
# 5  Extended offline    Completed without error       00%      5240         -
# 6  Extended offline    Completed without error       00%      5072         -
# 7  Extended offline    Completed without error       00%      4903         -
# 8  Extended offline    Completed without error       00%      4735         -
# 9  Extended offline    Completed without error       00%      4566         -
#10  Extended offline    Completed without error       00%      4399         -
#11  Extended offline    Completed without error       00%      4230         -
#12  Extended offline    Completed without error       00%      4063         -
#13  Extended offline    Completed without error       00%      3895         -
#14  Extended offline    Completed without error       00%      3726         -
#15  Extended offline    Completed without error       00%      3558         -
#16  Extended offline    Completed without error       00%      3390         -
#17  Extended offline    Completed without error       00%      3222         -
#18  Extended offline    Completed without error       00%      3054         -
#19  Extended offline    Completed without error       00%      2886         -
#20  Extended offline    Completed without error       00%      2719         -
#21  Extended offline    Completed without error       00%      2550         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Actions: View

Attachments on bug 25859: 11399 | 11402