Mageia Bugzilla – Attachment 11126 Details for
Bug 25001
LVM install: can't call method "val" on an undefined value.
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
Help
|
Log In
[x]
|
New Account
|
Forgot Password
syslog from above installation
syslog (text/plain), 54.27 KB, created by
Ulrich Beckmann
on 2019-06-25 15:24:04 CEST
(
hide
)
Description:
syslog from above installation
Filename:
MIME Type:
Creator:
Ulrich Beckmann
Created:
2019-06-25 15:24:04 CEST
Size:
54.27 KB
patch
obsolete
>] kernel/system logger ok ><5>[ 0.000000] Linux version 5.1.14-desktop-1.mga7 (iurt@scwx861.mageia.org) (gcc version 8.3.1 20190524 (Mageia 8.3.1-0.20190524.1.mga7)) #1 SMP Sat Jun 22 10:35:14 UTC 2019 ><6>[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz lang= kbd= vga=791 automatic=method:cdrom audit=0 noiswmd splash quiet ><6>[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' ><6>[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' ><6>[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. ><6>[ 0.000000] BIOS-provided physical RAM map: ><6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097bff] usable ><6>[ 0.000000] BIOS-e820: [mem 0x0000000000097c00-0x000000000009ffff] reserved ><6>[ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved ><6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdd7ffff] usable ><6>[ 0.000000] BIOS-e820: [mem 0x00000000bdd80000-0x00000000bdd8efff] ACPI data ><6>[ 0.000000] BIOS-e820: [mem 0x00000000bdd8f000-0x00000000bdddffff] ACPI NVS ><6>[ 0.000000] BIOS-e820: [mem 0x00000000bdde0000-0x00000000bddfffff] reserved ><6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved ><6>[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved ><6>[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved ><6>[ 0.000000] NX (Execute Disable) protection: active ><6>[ 0.000000] SMBIOS 2.5 present. ><6>[ 0.000000] DMI: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 207 05/08/2009 ><6>[ 0.000000] tsc: Fast TSC calibration using PIT ><6>[ 0.000000] tsc: Detected 2000.235 MHz processor ><7>[ 0.004036] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved ><7>[ 0.004037] e820: remove [mem 0x000a0000-0x000fffff] usable ><6>[ 0.004044] last_pfn = 0xbdd80 max_arch_pfn = 0x400000000 ><7>[ 0.004051] MTRR default type: uncachable ><7>[ 0.004052] MTRR fixed ranges enabled: ><7>[ 0.004053] 00000-9FFFF write-back ><7>[ 0.004054] A0000-BFFFF uncachable ><7>[ 0.004056] C0000-CFFFF write-protect ><7>[ 0.004057] D0000-DFFFF uncachable ><7>[ 0.004058] E0000-EFFFF write-through ><7>[ 0.004059] F0000-FFFFF write-protect ><7>[ 0.004059] MTRR variable ranges enabled: ><7>[ 0.004061] 0 base 000000000 mask F80000000 write-back ><7>[ 0.004063] 1 base 080000000 mask FC0000000 write-back ><7>[ 0.004064] 2 base 0BDE00000 mask FFFE00000 uncachable ><7>[ 0.004065] 3 base 0BE000000 mask FFE000000 uncachable ><7>[ 0.004066] 4 disabled ><7>[ 0.004067] 5 disabled ><7>[ 0.004068] 6 disabled ><7>[ 0.004068] 7 disabled ><6>[ 0.004633] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT ><6>[ 0.018345] found SMP MP-table at [mem 0x000ff780-0x000ff78f] ><7>[ 0.025436] BRK [0x1ca01000, 0x1ca01fff] PGTABLE ><7>[ 0.025438] BRK [0x1ca02000, 0x1ca02fff] PGTABLE ><7>[ 0.025440] BRK [0x1ca03000, 0x1ca03fff] PGTABLE ><7>[ 0.025490] BRK [0x1ca04000, 0x1ca04fff] PGTABLE ><7>[ 0.025493] BRK [0x1ca05000, 0x1ca05fff] PGTABLE ><7>[ 0.025718] BRK [0x1ca06000, 0x1ca06fff] PGTABLE ><6>[ 0.025763] RAMDISK: [mem 0x33b44000-0x35d99fff] ><6>[ 0.025772] ACPI: Early table checksum verification disabled ><6>[ 0.025860] ACPI: RSDP 0x00000000000F93E0 000024 (v02 ACPIAM) ><6>[ 0.025864] ACPI: XSDT 0x00000000BDD80100 000084 (v01 050809 XSDT1447 20090508 MSFT 00000097) ><6>[ 0.025870] ACPI: FACP 0x00000000BDD80290 0000F4 (v03 050809 FACP1447 20090508 MSFT 00000097) ><4>[ 0.025875] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20190215/tbfadt-569) ><6>[ 0.025880] ACPI: DSDT 0x00000000BDD80680 00C7B4 (v01 K50IJ K50IJ207 00000207 INTL 20051117) ><6>[ 0.025884] ACPI: FACS 0x00000000BDD8F000 000040 ><6>[ 0.025888] ACPI: FACS 0x00000000BDD8F000 000040 ><6>[ 0.025891] ACPI: APIC 0x00000000BDD80390 00005C (v01 050809 APIC1447 20090508 MSFT 00000097) ><6>[ 0.025895] ACPI: MCFG 0x00000000BDD80430 00003C (v01 050809 OEMMCFG 20090508 MSFT 00000097) ><6>[ 0.025898] ACPI: OEMX 0x00000000BDD80470 000176 (v01 050809 OEMX1447 20090508 MSFT 00000097) ><6>[ 0.025902] ACPI: ECDT 0x00000000BDD80620 000054 (v01 050809 OEMECDT 20090508 MSFT 00000097) ><6>[ 0.025906] ACPI: DBGP 0x00000000BDD803F0 000034 (v01 050809 DBGP1447 20090508 MSFT 00000097) ><6>[ 0.025910] ACPI: BOOT 0x00000000BDD805F0 000028 (v01 050809 BOOT1447 20090508 MSFT 00000097) ><6>[ 0.025914] ACPI: OEMB 0x00000000BDD8F040 000071 (v01 050809 OEMB1447 20090508 MSFT 00000097) ><6>[ 0.025918] ACPI: HPET 0x00000000BDD8CE40 000038 (v01 050809 OEMHPET 20090508 MSFT 00000097) ><6>[ 0.025922] ACPI: GSCI 0x00000000BDD8F0C0 002024 (v01 050809 GMCHSCI 20090508 MSFT 00000097) ><6>[ 0.025926] ACPI: ATKG 0x00000000BDD912F0 008024 (v01 022008 OEMATKG 20080220 MSFT 00000097) ><6>[ 0.025930] ACPI: SSDT 0x00000000BDD99E00 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) ><5>[ 0.025940] ACPI: DMI detected: ASUS K50IJ ><7>[ 0.025946] ACPI: Local APIC address 0xfee00000 ><6>[ 0.026055] No NUMA configuration found ><6>[ 0.026056] Faking a node at [mem 0x0000000000000000-0x00000000bdd7ffff] ><6>[ 0.026061] NODE_DATA(0) allocated [mem 0xbdd7c000-0xbdd7ffff] ><6>[ 0.026089] Zone ranges: ><6>[ 0.026090] DMA [mem 0x0000000000001000-0x0000000000ffffff] ><6>[ 0.026091] DMA32 [mem 0x0000000001000000-0x00000000bdd7ffff] ><6>[ 0.026093] Normal empty ><6>[ 0.026094] Movable zone start for each node ><6>[ 0.026095] Early memory node ranges ><6>[ 0.026096] node 0: [mem 0x0000000000001000-0x0000000000096fff] ><6>[ 0.026097] node 0: [mem 0x0000000000100000-0x00000000bdd7ffff] ><6>[ 0.026101] Zeroed struct page in unavailable ranges: 106 pages ><6>[ 0.026103] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bdd7ffff] ><7>[ 0.026104] On node 0 totalpages: 777494 ><7>[ 0.026105] DMA zone: 64 pages used for memmap ><7>[ 0.026106] DMA zone: 21 pages reserved ><7>[ 0.026107] DMA zone: 3990 pages, LIFO batch:0 ><7>[ 0.026249] DMA32 zone: 12086 pages used for memmap ><7>[ 0.026250] DMA32 zone: 773504 pages, LIFO batch:63 ><6>[ 0.053617] Reserving Intel graphics memory at [mem 0xbe000000-0xbfffffff] ><6>[ 0.053975] ACPI: PM-Timer IO Port: 0x808 ><7>[ 0.053977] ACPI: Local APIC address 0xfee00000 ><6>[ 0.054000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ><6>[ 0.054004] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ><6>[ 0.054006] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ><7>[ 0.054007] ACPI: IRQ0 used by override. ><7>[ 0.054009] ACPI: IRQ9 used by override. ><6>[ 0.054011] Using ACPI (MADT) for SMP configuration information ><6>[ 0.054013] ACPI: HPET id: 0x8086a301 base: 0xfed00000 ><6>[ 0.054021] smpboot: Allowing 2 CPUs, 0 hotplug CPUs ><6>[ 0.054039] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] ><6>[ 0.054041] PM: Registered nosave memory: [mem 0x00097000-0x00097fff] ><6>[ 0.054042] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff] ><6>[ 0.054042] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff] ><6>[ 0.054043] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff] ><6>[ 0.054046] [mem 0xc0000000-0xfed1ffff] available for PCI devices ><6>[ 0.054047] Booting paravirtualized kernel on bare hardware ><6>[ 0.054052] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns ><5>[ 0.275483] random: get_random_bytes called from start_kernel+0x94/0x4fc with crng_init=0 ><6>[ 0.275494] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1 ><6>[ 0.276469] percpu: Embedded 45 pages/cpu s146328 r8192 d29800 u1048576 ><7>[ 0.276478] pcpu-alloc: s146328 r8192 d29800 u1048576 alloc=1*2097152 ><7>[ 0.276479] pcpu-alloc: [0] 0 1 ><6>[ 0.276510] Built 1 zonelists, mobility grouping on. Total pages: 765323 ><6>[ 0.276511] Policy zone: DMA32 ><5>[ 0.276514] Kernel command line: BOOT_IMAGE=/boot/vmlinuz lang= kbd= vga=791 automatic=method:cdrom audit=0 noiswmd splash quiet ><6>[ 0.276678] audit: disabled (until reboot) ><7>[ 0.276816] Calgary: detecting Calgary via BIOS EBDA area ><7>[ 0.276817] Calgary: Unable to locate Rio Grande table in EBDA - bailing! ><6>[ 0.308241] Memory: 2998472K/3109976K available (12291K kernel code, 1374K rwdata, 3740K rodata, 1628K init, 1532K bss, 111504K reserved, 0K cma-reserved) ><6>[ 0.308448] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 ><6>[ 0.308461] Kernel/User page tables isolation: enabled ><6>[ 0.308497] ftrace: allocating 36425 entries in 143 pages ><6>[ 0.333951] rcu: Hierarchical RCU implementation. ><6>[ 0.333954] rcu: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2. ><6>[ 0.333955] Tasks RCU enabled. ><6>[ 0.333956] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. ><6>[ 0.333957] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 ><6>[ 0.338625] NR_IRQS: 8448, nr_irqs: 440, preallocated irqs: 16 ><6>[ 0.338870] Console: colour dummy device 80x25 ><6>[ 0.338877] printk: console [tty0] enabled ><6>[ 0.338904] ACPI: Core revision 20190215 ><4>[ 0.339042] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0x84, should be 0xE5 (20190215/tbprint-177) ><6>[ 0.339202] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns ><7>[ 0.339214] hpet clockevent registered ><6>[ 0.339221] APIC: Switch to symmetric I/O mode setup ><6>[ 0.339653] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 ><6>[ 0.344220] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cd50c4f3e4, max_idle_ns: 440795246811 ns ><6>[ 0.344238] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.47 BogoMIPS (lpj=2000235) ><6>[ 0.344240] pid_max: default: 32768 minimum: 301 ><6>[ 0.344284] LSM: Security Framework initializing ><6>[ 0.346515] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) ><6>[ 0.347732] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) ><6>[ 0.347798] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) ><6>[ 0.347839] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) ><5>[ 0.348114] *** VALIDATE proc *** ><5>[ 0.348197] *** VALIDATE cgroup1 *** ><5>[ 0.348199] *** VALIDATE cgroup2 *** ><6>[ 0.348268] process: using mwait in idle threads ><6>[ 0.348273] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 ><6>[ 0.348275] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 ><6>[ 0.348278] Spectre V2 : Mitigation: Full generic retpoline ><6>[ 0.348279] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch ><6>[ 0.348280] Speculative Store Bypass: Vulnerable ><6>[ 0.348320] MDS: Vulnerable: Clear CPU buffers attempted, no microcode ><6>[ 0.348515] Freeing SMP alternatives memory: 36K ><6>[ 0.351222] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz (family: 0x6, model: 0x17, stepping: 0xa) ><6>[ 0.351222] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ><6>[ 0.351222] ... version: 2 ><6>[ 0.351222] ... bit width: 40 ><6>[ 0.351222] ... generic registers: 2 ><6>[ 0.351222] ... value mask: 000000ffffffffff ><6>[ 0.351222] ... max period: 000000007fffffff ><6>[ 0.351222] ... fixed-purpose events: 3 ><6>[ 0.351222] ... event mask: 0000000700000003 ><6>[ 0.351222] rcu: Hierarchical SRCU implementation. ><6>[ 0.351334] smp: Bringing up secondary CPUs ... ><6>[ 0.351506] x86: Booting SMP configuration: ><6>[ 0.351508] .... node #0, CPUs: #1 ><6>[ 0.352263] smp: Brought up 1 node, 2 CPUs ><6>[ 0.352263] smpboot: Max logical packages: 1 ><6>[ 0.352263] smpboot: Total of 2 processors activated (8000.94 BogoMIPS) ><6>[ 0.353460] devtmpfs: initialized ><6>[ 0.353460] x86/mm: Memory block size: 128MB ><6>[ 0.354273] PM: Registering ACPI NVS region [mem 0xbdd8f000-0xbdddffff] (331776 bytes) ><6>[ 0.354353] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns ><6>[ 0.354353] futex hash table entries: 512 (order: 3, 32768 bytes) ><6>[ 0.354353] xor: measuring software checksum speed ><6>[ 0.363700] prefetch64-sse: 11464.000 MB/sec ><6>[ 0.373701] generic_sse: 9640.000 MB/sec ><6>[ 0.373702] xor: using function: prefetch64-sse (11464.000 MB/sec) ><6>[ 0.374226] pinctrl core: initialized pinctrl subsystem ><6>[ 0.374381] PM: RTC time: 12:29:50, date: 2019-06-25 ><6>[ 0.374566] NET: Registered protocol family 16 ><6>[ 0.374890] cpuidle: using governor ladder ><6>[ 0.374890] cpuidle: using governor menu ><6>[ 0.374890] Simple Boot Flag at 0x51 set to 0x1 ><6>[ 0.374890] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ><6>[ 0.374890] ACPI: bus type PCI registered ><6>[ 0.374890] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ><6>[ 0.374890] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) ><6>[ 0.374890] PCI: not using MMCONFIG ><6>[ 0.374890] PCI: Using configuration type 1 for base access ><4>[ 0.375385] mtrr: your CPUs had inconsistent variable MTRR settings ><6>[ 0.375386] mtrr: probably your BIOS does not setup all CPUs. ><6>[ 0.375387] mtrr: corrected configuration. ><6>[ 0.376708] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages ><6>[ 0.393226] raid6: sse2x4 gen() 5863 MB/s ><6>[ 0.410226] raid6: sse2x4 xor() 4560 MB/s ><6>[ 0.427237] raid6: sse2x2 gen() 3488 MB/s ><6>[ 0.444229] raid6: sse2x2 xor() 4062 MB/s ><6>[ 0.461232] raid6: sse2x1 gen() 3140 MB/s ><6>[ 0.478225] raid6: sse2x1 xor() 3433 MB/s ><6>[ 0.478226] raid6: using algorithm sse2x4 gen() 5863 MB/s ><6>[ 0.478227] raid6: .... xor() 4560 MB/s, rmw enabled ><6>[ 0.478229] raid6: using ssse3x2 recovery algorithm ><6>[ 0.478346] ACPI: Added _OSI(Module Device) ><6>[ 0.478347] ACPI: Added _OSI(Processor Device) ><6>[ 0.478348] ACPI: Added _OSI(3.0 _SCP Extensions) ><6>[ 0.478349] ACPI: Added _OSI(Processor Aggregator Device) ><6>[ 0.478351] ACPI: Added _OSI(Linux-Dell-Video) ><6>[ 0.478352] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) ><6>[ 0.478353] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) ><6>[ 0.478354] ACPI: Deleted _OSI(Windows 2009) ><6>[ 0.486935] ACPI: 2 ACPI AML tables successfully acquired and loaded ><6>[ 0.487516] ACPI: EC: EC started ><6>[ 0.487517] ACPI: EC: interrupt blocked ><6>[ 0.495619] ACPI: \: Used as first EC ><6>[ 0.495621] ACPI: \: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62 ><6>[ 0.495622] ACPI: EC: Boot ECDT EC used to handle transactions ><5>[ 0.497242] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored ><6>[ 0.497640] ACPI: Dynamic OEM Table Load: ><6>[ 0.497648] ACPI: SSDT 0xFFFF94897954F400 000206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ><6>[ 0.497999] ACPI: Dynamic OEM Table Load: ><6>[ 0.498006] ACPI: SSDT 0xFFFF9489794BB000 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ><6>[ 0.498546] ACPI: Dynamic OEM Table Load: ><6>[ 0.498551] ACPI: SSDT 0xFFFF9489794E4E00 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) ><6>[ 0.498767] ACPI: Dynamic OEM Table Load: ><6>[ 0.498772] ACPI: SSDT 0xFFFF9489794DE000 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) ><6>[ 0.499174] ACPI: Interpreter enabled ><6>[ 0.499203] ACPI: (supports S0 S3 S4 S5) ><6>[ 0.499205] ACPI: Using IOAPIC for interrupt routing ><6>[ 0.499259] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) ><6>[ 0.500717] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ><6>[ 0.500739] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ><6>[ 0.501062] ACPI: Enabled 14 GPEs in block 00 to 3F ><6>[ 0.508896] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) ><6>[ 0.508902] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] ><6>[ 0.509159] acpi PNP0A08:00: _OSC: platform does not support [LTR] ><6>[ 0.509413] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] ><6>[ 0.509415] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration ><6>[ 0.509674] PCI host bridge to bus 0000:00 ><6>[ 0.509677] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] ><6>[ 0.509679] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] ><6>[ 0.509681] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] ><6>[ 0.509682] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] ><6>[ 0.509684] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xffffffff window] ><6>[ 0.509686] pci_bus 0000:00: root bus resource [bus 00-ff] ><7>[ 0.509698] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 ><6>[ 0.509731] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset ><6>[ 0.509733] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability ><7>[ 0.509838] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 ><7>[ 0.509854] pci 0000:00:02.0: reg 0x10: [mem 0xfd800000-0xfdbfffff 64bit] ><7>[ 0.509862] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] ><7>[ 0.509868] pci 0000:00:02.0: reg 0x20: [io 0xcc00-0xcc07] ><7>[ 0.509988] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 ><7>[ 0.510001] pci 0000:00:02.1: reg 0x10: [mem 0xfdd00000-0xfddfffff 64bit] ><7>[ 0.510166] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 ><7>[ 0.510240] pci 0000:00:1a.0: reg 0x20: [io 0xc880-0xc89f] ><7>[ 0.510405] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 ><7>[ 0.510473] pci 0000:00:1a.1: reg 0x20: [io 0xc800-0xc81f] ><7>[ 0.510629] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 ><7>[ 0.510697] pci 0000:00:1a.2: reg 0x20: [io 0xc480-0xc49f] ><7>[ 0.510862] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 ><7>[ 0.510892] pci 0000:00:1a.7: reg 0x10: [mem 0xfdefbc00-0xfdefbfff] ><7>[ 0.511008] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold ><7>[ 0.511129] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 ><7>[ 0.511163] pci 0000:00:1b.0: reg 0x10: [mem 0xfdef4000-0xfdef7fff 64bit] ><7>[ 0.511290] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold ><7>[ 0.511406] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 ><7>[ 0.511536] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold ><7>[ 0.511669] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 ><7>[ 0.511807] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold ><7>[ 0.511937] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 ><7>[ 0.512114] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold ><7>[ 0.512252] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 ><7>[ 0.512380] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold ><7>[ 0.512513] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 ><7>[ 0.512688] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold ><7>[ 0.512817] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 ><7>[ 0.512885] pci 0000:00:1d.0: reg 0x20: [io 0xc400-0xc41f] ><7>[ 0.513042] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 ><7>[ 0.513110] pci 0000:00:1d.1: reg 0x20: [io 0xc080-0xc09f] ><7>[ 0.513272] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 ><7>[ 0.513339] pci 0000:00:1d.2: reg 0x20: [io 0xc000-0xc01f] ><7>[ 0.513508] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 ><7>[ 0.513538] pci 0000:00:1d.7: reg 0x10: [mem 0xfdefb800-0xfdefbbff] ><7>[ 0.513652] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold ><7>[ 0.513765] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 ><7>[ 0.513957] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 ><7>[ 0.514201] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 ><7>[ 0.514234] pci 0000:00:1f.2: reg 0x10: [io 0xbc00-0xbc07] ><7>[ 0.514246] pci 0000:00:1f.2: reg 0x14: [io 0xb880-0xb883] ><7>[ 0.514258] pci 0000:00:1f.2: reg 0x18: [io 0xb800-0xb807] ><7>[ 0.514269] pci 0000:00:1f.2: reg 0x1c: [io 0xb480-0xb483] ><7>[ 0.514280] pci 0000:00:1f.2: reg 0x20: [io 0xb400-0xb41f] ><7>[ 0.514292] pci 0000:00:1f.2: reg 0x24: [mem 0xfdefb000-0xfdefb7ff] ><7>[ 0.514361] pci 0000:00:1f.2: PME# supported from D3hot ><6>[ 0.514532] pci 0000:00:1c.0: PCI bridge to [bus 01] ><7>[ 0.514634] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000 ><7>[ 0.514683] pci 0000:02:00.0: reg 0x10: [mem 0xfdff0000-0xfdffffff 64bit] ><7>[ 0.514865] pci 0000:02:00.0: supports D1 ><7>[ 0.514867] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold ><6>[ 0.515030] pci 0000:00:1c.1: PCI bridge to [bus 02] ><7>[ 0.515037] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff] ><6>[ 0.515161] pci 0000:00:1c.2: PCI bridge to [bus 03-04] ><7>[ 0.515165] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] ><7>[ 0.515170] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfeafffff] ><7>[ 0.515178] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfcffffff 64bit pref] ><6>[ 0.515244] pci 0000:00:1c.3: PCI bridge to [bus 05] ><7>[ 0.515346] pci 0000:06:00.0: [1969:1026] type 00 class 0x020000 ><7>[ 0.515392] pci 0000:06:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit] ><7>[ 0.515408] pci 0000:06:00.0: reg 0x18: [io 0xec00-0xec7f] ><7>[ 0.515559] pci 0000:06:00.0: PME# supported from D3hot D3cold ><6>[ 0.515703] pci 0000:00:1c.5: PCI bridge to [bus 06] ><7>[ 0.515708] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] ><7>[ 0.515713] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff] ><6>[ 0.515747] pci_bus 0000:07: extended config space not accessible ><6>[ 0.515830] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) ><7>[ 0.515844] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) ><7>[ 0.515846] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) ><7>[ 0.515848] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) ><7>[ 0.515853] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) ><7>[ 0.515855] pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xffffffff window] (subtractive decode) ><6>[ 0.516673] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12) ><6>[ 0.516739] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12) ><6>[ 0.516803] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) ><6>[ 0.516865] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12) ><6>[ 0.516929] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled. ><6>[ 0.516992] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12) ><6>[ 0.517055] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12) ><6>[ 0.517119] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12) ><6>[ 0.517411] ACPI: EC: interrupt unblocked ><6>[ 0.517425] ACPI: EC: event unblocked ><6>[ 0.517435] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62 ><6>[ 0.517437] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events ><6>[ 0.517561] pci 0000:00:02.0: vgaarb: setting as boot VGA device ><6>[ 0.517561] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none ><6>[ 0.517561] pci 0000:00:02.0: vgaarb: bridge control possible ><6>[ 0.517561] vgaarb: loaded ><5>[ 0.517561] SCSI subsystem initialized ><7>[ 0.517561] libata version 3.00 loaded. ><6>[ 0.517561] EDAC MC: Ver: 3.0.0 ><6>[ 0.518255] PCI: Using ACPI for IRQ routing ><7>[ 0.528848] PCI: pci_cache_line_size set to 64 bytes ><7>[ 0.528930] e820: reserve RAM buffer [mem 0x00097c00-0x0009ffff] ><7>[ 0.528932] e820: reserve RAM buffer [mem 0xbdd80000-0xbfffffff] ><6>[ 0.529222] NetLabel: Initializing ><6>[ 0.529222] NetLabel: domain hash size = 128 ><6>[ 0.529222] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO ><6>[ 0.529222] NetLabel: unlabeled traffic allowed by default ><6>[ 0.529317] HPET: 4 timers in total, 0 timers will be used for per-cpu timer ><6>[ 0.529324] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 ><6>[ 0.529328] hpet0: 4 comparators, 64-bit 14.318180 MHz counter ><6>[ 0.531248] clocksource: Switched to clocksource tsc-early ><5>[ 0.557022] VFS: Disk quotas dquot_6.6.0 ><6>[ 0.557044] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) ><5>[ 0.557086] *** VALIDATE hugetlbfs *** ><6>[ 0.557155] pnp: PnP ACPI init ><6>[ 0.557283] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved ><7>[ 0.557292] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) ><7>[ 0.557369] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) ><7>[ 0.557426] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) ><7>[ 0.557500] pnp 00:03: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) ><6>[ 0.557739] system 00:04: [io 0x04d0-0x04d1] has been reserved ><6>[ 0.557741] system 00:04: [io 0x0800-0x087f] has been reserved ><6>[ 0.557743] system 00:04: [io 0x0400-0x041f] has been reserved ><6>[ 0.557745] system 00:04: [io 0x0500-0x057f] has been reserved ><6>[ 0.557748] system 00:04: [mem 0xfdefac00-0xfdefacff window] has been reserved ><6>[ 0.557751] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved ><6>[ 0.557753] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved ><6>[ 0.557755] system 00:04: [mem 0xfed45000-0xfed89fff] has been reserved ><6>[ 0.557757] system 00:04: [mem 0xfed90000-0xfed90fff] has been reserved ><6>[ 0.557759] system 00:04: [mem 0xfed91000-0xfed91fff] has been reserved ><6>[ 0.557761] system 00:04: [mem 0xfed92000-0xfed92fff] has been reserved ><6>[ 0.557763] system 00:04: [mem 0xfed93000-0xfed93fff] has been reserved ><6>[ 0.557765] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved ><6>[ 0.557768] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved ><7>[ 0.557774] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) ><6>[ 0.557902] system 00:05: [mem 0xffa00000-0xffbfffff] could not be reserved ><6>[ 0.557904] system 00:05: [mem 0xffe00000-0xffffffff] could not be reserved ><7>[ 0.557910] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) ><6>[ 0.557995] system 00:06: [mem 0xffc00000-0xffdfffff] has been reserved ><7>[ 0.558001] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) ><6>[ 0.558096] system 00:07: [io 0x0250-0x0253] has been reserved ><6>[ 0.558098] system 00:07: [io 0x0256-0x025f] has been reserved ><6>[ 0.558101] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved ><6>[ 0.558103] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved ><6>[ 0.558105] system 00:07: [mem 0xfec10000-0xfec17fff] has been reserved ><6>[ 0.558107] system 00:07: [mem 0xfec18000-0xfec1ffff] has been reserved ><6>[ 0.558109] system 00:07: [mem 0xfec20000-0xfec27fff] has been reserved ><6>[ 0.558111] system 00:07: [mem 0xfec28000-0xfec2ffff] has been reserved ><6>[ 0.558113] system 00:07: [mem 0xfec38000-0xfec3ffff] has been reserved ><7>[ 0.558119] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) ><6>[ 0.558246] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved ><7>[ 0.558252] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) ><6>[ 0.558618] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved ><6>[ 0.558620] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved ><6>[ 0.558622] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved ><6>[ 0.558624] system 00:09: [mem 0x00100000-0xbddfffff] could not be reserved ><7>[ 0.558630] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) ><6>[ 0.558782] pnp: PnP ACPI: found 10 devices ><6>[ 0.565276] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns ><7>[ 0.565291] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 ><6>[ 0.565309] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbde00000-0xbdffffff 64bit pref] ><6>[ 0.565313] pci 0000:00:1c.0: PCI bridge to [bus 01] ><6>[ 0.565329] pci 0000:00:1c.1: PCI bridge to [bus 02] ><6>[ 0.565335] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff] ><6>[ 0.565346] pci 0000:00:1c.2: PCI bridge to [bus 03-04] ><6>[ 0.565349] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] ><6>[ 0.565355] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfeafffff] ><6>[ 0.565360] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfcffffff 64bit pref] ><6>[ 0.565368] pci 0000:00:1c.3: PCI bridge to [bus 05] ><6>[ 0.565382] pci 0000:00:1c.5: PCI bridge to [bus 06] ><6>[ 0.565386] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] ><6>[ 0.565391] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff] ><6>[ 0.565396] pci 0000:00:1c.5: bridge window [mem 0xbde00000-0xbdffffff 64bit pref] ><6>[ 0.565404] pci 0000:00:1e.0: PCI bridge to [bus 07] ><7>[ 0.565419] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] ><7>[ 0.565421] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] ><7>[ 0.565423] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] ><7>[ 0.565425] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] ><7>[ 0.565426] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xffffffff window] ><7>[ 0.565429] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] ><7>[ 0.565430] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] ><7>[ 0.565432] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfeafffff] ><7>[ 0.565434] pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfcffffff 64bit pref] ><7>[ 0.565436] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] ><7>[ 0.565437] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff] ><7>[ 0.565439] pci_bus 0000:06: resource 2 [mem 0xbde00000-0xbdffffff 64bit pref] ><7>[ 0.565441] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window] ><7>[ 0.565443] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window] ><7>[ 0.565444] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window] ><7>[ 0.565446] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window] ><7>[ 0.565448] pci_bus 0000:07: resource 8 [mem 0xbde00000-0xffffffff window] ><6>[ 0.565575] NET: Registered protocol family 2 ><6>[ 0.565798] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) ><6>[ 0.565827] TCP established hash table entries: 32768 (order: 6, 262144 bytes) ><6>[ 0.565950] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) ><6>[ 0.566128] TCP: Hash tables configured (established 32768 bind 32768) ><6>[ 0.566226] UDP hash table entries: 2048 (order: 4, 65536 bytes) ><6>[ 0.566265] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) ><6>[ 0.566375] NET: Registered protocol family 1 ><6>[ 0.566384] NET: Registered protocol family 44 ><6>[ 0.566407] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] ><7>[ 0.567583] PCI: CLS 32 bytes, default 64 ><6>[ 0.567659] Trying to unpack rootfs image as initramfs... ><6>[ 3.144678] Freeing initrd memory: 35160K ><5>[ 3.145683] Initialise system trusted keyrings ><6>[ 3.145773] workingset: timestamp_bits=40 max_order=20 bucket_order=0 ><6>[ 3.148752] zbud: loaded ><5>[ 3.200257] Key type asymmetric registered ><5>[ 3.200260] Asymmetric key parser 'x509' registered ><6>[ 3.200288] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) ><6>[ 3.200348] io scheduler mq-deadline registered ><6>[ 3.200349] io scheduler kyber registered ><6>[ 3.200421] io scheduler bfq registered ><6>[ 3.200963] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 ><6>[ 3.201201] pcieport 0000:00:1c.1: Signaling PME with IRQ 25 ><6>[ 3.201458] pcieport 0000:00:1c.2: Signaling PME with IRQ 26 ><6>[ 3.201495] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum) ><6>[ 3.201845] pcieport 0000:00:1c.3: Signaling PME with IRQ 27 ><6>[ 3.202074] pcieport 0000:00:1c.5: Signaling PME with IRQ 28 ><6>[ 3.202110] pciehp 0000:00:1c.5:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum) ><6>[ 3.202373] vesafb: mode is 1024x768x16, linelength=2048, pages=20 ><6>[ 3.202375] vesafb: scrolling: redraw ><6>[ 3.202377] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 ><6>[ 3.202398] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 3072k, total 32704k ><6>[ 3.202537] Console: switching to colour frame buffer device 128x48 ><6>[ 3.214577] fb0: VESA VGA frame buffer device ><7>[ 3.214606] intel_idle: does not run on family 6 model 23 ><7>[ 3.214993] Monitor-Mwait will be used to enter C-1 state ><7>[ 3.214999] Monitor-Mwait will be used to enter C-2 state ><7>[ 3.215002] Monitor-Mwait will be used to enter C-3 state ><6>[ 3.215005] tsc: Marking TSC unstable due to TSC halts in idle ><6>[ 3.215097] clocksource: Switched to clocksource hpet ><6>[ 3.215670] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ><6>[ 3.216363] Linux agpgart interface v0.103 ><6>[ 3.219744] brd: module loaded ><7>[ 3.220410] ahci 0000:00:1f.2: version 3.0 ><6>[ 3.220631] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled ><6>[ 3.220669] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode ><6>[ 3.220672] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs ><6>[ 3.227064] scsi host0: ahci ><6>[ 3.227393] scsi host1: ahci ><6>[ 3.227654] scsi host2: ahci ><6>[ 3.227902] scsi host3: ahci ><6>[ 3.228161] scsi host4: ahci ><6>[ 3.228449] scsi host5: ahci ><6>[ 3.228601] ata1: SATA max UDMA/133 abar m2048@0xfdefb000 port 0xfdefb100 irq 29 ><6>[ 3.228604] ata2: SATA max UDMA/133 abar m2048@0xfdefb000 port 0xfdefb180 irq 29 ><6>[ 3.228605] ata3: DUMMY ><6>[ 3.228606] ata4: DUMMY ><6>[ 3.228607] ata5: DUMMY ><6>[ 3.228610] ata6: SATA max UDMA/133 abar m2048@0xfdefb000 port 0xfdefb380 irq 29 ><6>[ 3.228942] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 ><6>[ 3.232014] i8042: Detected active multiplexing controller, rev 1.1 ><6>[ 3.234774] serio: i8042 KBD port at 0x60,0x64 irq 1 ><6>[ 3.234781] serio: i8042 AUX0 port at 0x60,0x64 irq 12 ><6>[ 3.234822] serio: i8042 AUX1 port at 0x60,0x64 irq 12 ><6>[ 3.234854] serio: i8042 AUX2 port at 0x60,0x64 irq 12 ><6>[ 3.234885] serio: i8042 AUX3 port at 0x60,0x64 irq 12 ><6>[ 3.235093] mousedev: PS/2 mouse device common for all mice ><6>[ 3.235169] rtc_cmos 00:01: RTC can wake from S4 ><6>[ 3.235400] rtc_cmos 00:01: registered as rtc0 ><6>[ 3.235423] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs ><6>[ 3.235439] intel_pstate: CPU model not supported ><6>[ 3.235480] ledtrig-cpu: registered to indicate activity on CPUs ><5>[ 3.235728] Key type dns_resolver registered ><6>[ 3.235730] mpls_gso: MPLS GSO support ><6>[ 3.235891] mce: Using 6 MCE banks ><6>[ 3.235943] microcode: sig=0x1067a, pf=0x80, revision=0xa07 ><6>[ 3.236026] microcode: Microcode Update Driver: v2.2. ><6>[ 3.236267] registered taskstats version 1 ><5>[ 3.236268] Loading compiled-in X.509 certificates ><6>[ 3.236321] zswap: loaded using pool lzo/zbud ><6>[ 3.237091] Btrfs loaded, crc32c=crc32c-generic ><5>[ 3.242935] Key type encrypted registered ><6>[ 3.243482] PM: Magic number: 7:78:482 ><6>[ 3.243648] rtc_cmos 00:01: setting system clock to 2019-06-25T12:29:53 UTC (1561465793) ><6>[ 3.243762] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found ><4>[ 3.243842] Unstable clock detected, switching default tracing clock to "global" ><4>[ 3.243842] If you want to keep using the local clock, then add: ><4>[ 3.243842] "trace_clock=local" ><4>[ 3.243842] on the kernel command line ><6>[ 3.274908] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ><6>[ 3.538206] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ><6>[ 3.539247] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ><7>[ 3.539457] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded ><6>[ 3.539460] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ><6>[ 3.796282] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133 ><6>[ 3.796284] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32) ><6>[ 3.798369] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ><7>[ 3.810521] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded ><6>[ 3.810524] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ><6>[ 3.812340] ata1.00: configured for UDMA/133 ><5>[ 3.812643] scsi 0:0:0:0: Direct-Access ATA ST9250315AS SDM1 PQ: 0 ANSI: 5 ><5>[ 3.812993] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) ><5>[ 3.813025] sd 0:0:0:0: [sda] Write Protect is off ><7>[ 3.813028] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 ><5>[ 3.813097] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ><6>[ 3.884479] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > ><5>[ 3.885333] sd 0:0:0:0: [sda] Attached SCSI disk ><6>[ 4.122183] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ><7>[ 4.123929] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded ><6>[ 4.123932] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ><6>[ 4.125818] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.00, max UDMA/100 ><7>[ 4.129918] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded ><6>[ 4.129920] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ><6>[ 4.131854] ata2.00: configured for UDMA/100 ><5>[ 4.135252] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.00 PQ: 0 ANSI: 5 ><5>[ 4.149261] random: fast init done ><6>[ 4.466179] ata6: SATA link down (SStatus 0 SControl 300) ><6>[ 4.467994] Freeing unused kernel image memory: 1628K ><6>[ 4.472309] Write protecting the kernel read-only data: 18432k ><6>[ 4.473665] Freeing unused kernel image memory: 2020K ><6>[ 4.473995] Freeing unused kernel image memory: 356K ><6>[ 4.491219] x86/mm: Checked W+X mappings: passed, no W+X pages found. ><6>[ 4.491251] x86/mm: Checking user space page tables ><6>[ 4.508004] x86/mm: Checked W+X mappings: passed, no W+X pages found. ><6>[ 4.508008] Run /init as init process ><30>[ 4.616539] dracut: dracut-046 ><6>[ 4.925888] battery: ACPI: Battery Slot [BAT0] (battery absent) ><5>[ 5.051416] asus_laptop: Asus Laptop Support version 0.42 ><5>[ 5.051531] asus_laptop: K50IJ model detected ><6>[ 5.058524] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5 ><6>[ 5.116741] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray ><6>[ 5.116745] cdrom: Uniform CD-ROM driver Revision: 3.20 ><7>[ 5.117020] sr 1:0:0:0: Attached scsi CD-ROM sr0 ><6>[ 5.161992] ACPI: bus type USB registered ><6>[ 5.162025] usbcore: registered new interface driver usbfs ><6>[ 5.162039] usbcore: registered new interface driver hub ><6>[ 5.172576] usbcore: registered new device driver usb ><6>[ 5.190552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ><6>[ 5.191430] ehci-pci: EHCI PCI platform driver ><6>[ 5.191605] ehci-pci 0000:00:1a.7: EHCI Host Controller ><6>[ 5.191617] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 ><6>[ 5.191635] ehci-pci 0000:00:1a.7: debug port 1 ><7>[ 5.195540] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported ><6>[ 5.195567] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdefbc00 ><6>[ 5.202261] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 ><6>[ 5.202359] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 ><6>[ 5.202361] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>[ 5.202363] usb usb1: Product: EHCI Host Controller ><6>[ 5.202365] usb usb1: Manufacturer: Linux 5.1.14-desktop-1.mga7 ehci_hcd ><6>[ 5.202366] usb usb1: SerialNumber: 0000:00:1a.7 ><6>[ 5.202579] hub 1-0:1.0: USB hub found ><6>[ 5.202590] hub 1-0:1.0: 6 ports detected ><6>[ 5.203015] ehci-pci 0000:00:1d.7: EHCI Host Controller ><6>[ 5.203024] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 ><6>[ 5.203039] ehci-pci 0000:00:1d.7: debug port 1 ><7>[ 5.206953] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported ><6>[ 5.206982] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdefb800 ><6>[ 5.213259] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 ><6>[ 5.213384] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 ><6>[ 5.213386] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>[ 5.213388] usb usb2: Product: EHCI Host Controller ><6>[ 5.213390] usb usb2: Manufacturer: Linux 5.1.14-desktop-1.mga7 ehci_hcd ><6>[ 5.213392] usb usb2: SerialNumber: 0000:00:1d.7 ><6>[ 5.213590] hub 2-0:1.0: USB hub found ><6>[ 5.213604] hub 2-0:1.0: 6 ports detected ><6>[ 5.278195] uhci_hcd: USB Universal Host Controller Interface driver ><6>[ 5.280447] uhci_hcd 0000:00:1a.0: UHCI Host Controller ><6>[ 5.280457] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 ><6>[ 5.280467] uhci_hcd 0000:00:1a.0: detected 2 ports ><6>[ 5.280507] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880 ><6>[ 5.280592] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 ><6>[ 5.280594] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>[ 5.280596] usb usb3: Product: UHCI Host Controller ><6>[ 5.280598] usb usb3: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd ><6>[ 5.280599] usb usb3: SerialNumber: 0000:00:1a.0 ><6>[ 5.280763] hub 3-0:1.0: USB hub found ><6>[ 5.280773] hub 3-0:1.0: 2 ports detected ><6>[ 5.282462] uhci_hcd 0000:00:1a.1: UHCI Host Controller ><6>[ 5.282473] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 ><6>[ 5.282483] uhci_hcd 0000:00:1a.1: detected 2 ports ><6>[ 5.282519] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800 ><6>[ 5.285373] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 ><6>[ 5.285376] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>[ 5.285378] usb usb4: Product: UHCI Host Controller ><6>[ 5.285380] usb usb4: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd ><6>[ 5.285382] usb usb4: SerialNumber: 0000:00:1a.1 ><6>[ 5.285640] hub 4-0:1.0: USB hub found ><6>[ 5.285920] hub 4-0:1.0: 2 ports detected ><6>[ 5.287989] uhci_hcd 0000:00:1a.2: UHCI Host Controller ><6>[ 5.288012] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 ><6>[ 5.288025] uhci_hcd 0000:00:1a.2: detected 2 ports ><6>[ 5.288071] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480 ><6>[ 5.289306] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 ><6>[ 5.289308] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>[ 5.289310] usb usb5: Product: UHCI Host Controller ><6>[ 5.289312] usb usb5: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd ><6>[ 5.289314] usb usb5: SerialNumber: 0000:00:1a.2 ><6>[ 5.292607] hub 5-0:1.0: USB hub found ><6>[ 5.292627] hub 5-0:1.0: 2 ports detected ><6>[ 5.292940] uhci_hcd 0000:00:1d.0: UHCI Host Controller ><6>[ 5.292948] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 ><6>[ 5.292956] uhci_hcd 0000:00:1d.0: detected 2 ports ><6>[ 5.292984] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400 ><6>[ 5.293058] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 ><6>[ 5.293060] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>[ 5.293062] usb usb6: Product: UHCI Host Controller ><6>[ 5.293064] usb usb6: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd ><6>[ 5.293065] usb usb6: SerialNumber: 0000:00:1d.0 ><6>[ 5.293209] hub 6-0:1.0: USB hub found ><6>[ 5.293219] hub 6-0:1.0: 2 ports detected ><6>[ 5.294841] uhci_hcd 0000:00:1d.1: UHCI Host Controller ><6>[ 5.294852] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 ><6>[ 5.294864] uhci_hcd 0000:00:1d.1: detected 2 ports ><6>[ 5.294891] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080 ><6>[ 5.294986] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 ><6>[ 5.294988] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>[ 5.294990] usb usb7: Product: UHCI Host Controller ><6>[ 5.294992] usb usb7: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd ><6>[ 5.294994] usb usb7: SerialNumber: 0000:00:1d.1 ><6>[ 5.295193] hub 7-0:1.0: USB hub found ><6>[ 5.295208] hub 7-0:1.0: 2 ports detected ><6>[ 5.296539] uhci_hcd 0000:00:1d.2: UHCI Host Controller ><6>[ 5.296549] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 ><6>[ 5.296560] uhci_hcd 0000:00:1d.2: detected 2 ports ><6>[ 5.296586] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000 ><6>[ 5.297573] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 ><6>[ 5.297576] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>[ 5.297578] usb usb8: Product: UHCI Host Controller ><6>[ 5.297580] usb usb8: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd ><6>[ 5.297582] usb usb8: SerialNumber: 0000:00:1d.2 ><6>[ 5.299559] hub 8-0:1.0: USB hub found ><6>[ 5.299737] hub 8-0:1.0: 2 ports detected ><6>[ 5.316661] ATL1E 0000:06:00.0 enp6s0: renamed from eth0 ><5>[ 5.336281] cfg80211: Loading compiled-in X.509 certificates for regulatory database ><5>[ 5.359550] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' ><4>[ 5.359607] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 ><6>[ 5.359610] cfg80211: failed to load regulatory.db ><6>[ 5.518986] ath: phy0: Enable LNA combining ><6>[ 5.521561] ath: phy0: ASPM enabled: 0x42 ><7>[ 5.521564] ath: EEPROM regdomain: 0x60 ><7>[ 5.521565] ath: EEPROM indicates we should expect a direct regpair map ><7>[ 5.521567] ath: Country alpha2 being used: 00 ><7>[ 5.521568] ath: Regpair used: 0x60 ><7>[ 5.530047] ieee80211 phy0: Failed to initialize wep: -2 ><7>[ 5.530340] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ><6>[ 5.530677] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa61300920000, irq=17 ><6>[ 5.533050] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 ><6>[ 5.538264] usb 1-3: new high-speed USB device number 2 using ehci-pci ><6>[ 5.710788] usb 1-3: New USB device found, idVendor=04f2, idProduct=b071, bcdDevice=15.15 ><6>[ 5.710791] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 ><6>[ 5.710793] usb 1-3: Product: CNF7129 ><6>[ 5.710794] usb 1-3: Manufacturer: Chicony Electronics Co., Ltd. ><6>[ 5.710796] usb 1-3: SerialNumber: SN0001 ><6>[ 5.719632] media: Linux media interface: v0.10 ><6>[ 5.737630] videodev: Linux video capture interface: v2.00 ><6>[ 5.969297] usb 6-1: new full-speed USB device number 2 using uhci_hcd ><6>[ 6.151350] usb 6-1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 ><6>[ 6.151354] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 ><6>[ 6.151357] usb 6-1: Product: USB Receiver ><6>[ 6.151360] usb 6-1: Manufacturer: Logitech ><6>[ 6.172104] hidraw: raw HID events driver (C) Jiri Kosina ><6>[ 6.183998] usbcore: registered new interface driver usbhid ><6>[ 6.184000] usbhid: USB HID core driver ><6>[ 6.186765] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:046D:C534.0001/input/input10 ><6>[ 6.238463] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 ><6>[ 6.239493] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:046D:C534.0002/input/input11 ><6>[ 6.239696] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:046D:C534.0002/input/input12 ><6>[ 6.291484] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:046D:C534.0002/input/input13 ><6>[ 6.291770] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 ><6>[ 6.429263] usb 2-2: new high-speed USB device number 3 using ehci-pci ><6>[ 6.566423] usb 2-2: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.0b ><6>[ 6.566426] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 ><6>[ 6.566429] usb 2-2: Product: Intenso Alu Line ><6>[ 6.566431] usb 2-2: Manufacturer: Alcor Tech ><6>[ 6.566433] usb 2-2: SerialNumber: 13082600010352 ><6>[ 6.578335] usb-storage 2-2:1.0: USB Mass Storage device detected ><6>[ 6.578534] scsi host6: usb-storage 2-2:1.0 ><6>[ 6.578683] usbcore: registered new interface driver usb-storage ><6>[ 6.580894] usbcore: registered new interface driver uas ><5>[ 7.606360] scsi 6:0:0:0: Direct-Access Intenso Alu Line 8.07 PQ: 0 ANSI: 4 ><5>[ 7.608449] sd 6:0:0:0: [sdb] 15257600 512-byte logical blocks: (7.81 GB/7.28 GiB) ><5>[ 7.609576] sd 6:0:0:0: [sdb] Write Protect is off ><7>[ 7.609582] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 ><5>[ 7.610712] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA ><5>[ 7.616698] random: crng init done ><6>[ 7.616711] sdb: sdb1 sdb2 ><5>[ 7.620458] sd 6:0:0:0: [sdb] Attached SCSI removable disk ><6>[ 9.932516] Uniform Multi-Platform E-IDE driver ><6>[ 9.935536] ide-cd driver 5.00 ><4>[ 20.564817] ISOFS: Unable to identify CD-ROM format. ><7>[ 20.587441] ISO 9660 Extensions: Microsoft Joliet Level 3 ><7>[ 20.594081] ISO 9660 Extensions: RRIP_1991A ><6>[ 26.214130] loop: module loaded ><6>[ 26.380829] squashfs: version 4.0 (2009/01/31) Phillip Lougher ><30>[ 26.428695] dracut: Mounted root filesystem none ><30>[ 26.519811] dracut: Switching root ><1054>[ 28.982827] systemd-udevd[424]: Using default interface naming scheme 'v240'. ><1054>[ 28.991965] systemd-udevd[422]: Using default interface naming scheme 'v240'. ><1052>[ 29.102225] systemd-udevd[422]: Process '/sbin/mageia-setup-keyboard --udev' failed with exit code 127. ><1052>[ 29.103938] systemd-udevd[421]: Process '/sbin/mageia-setup-keyboard --udev' failed with exit code 127. ><1052>[ 29.126601] systemd-udevd[415]: Process '/sbin/mageia-setup-keyboard --udev' failed with exit code 127. ><1052>[ 29.151346] systemd-udevd[417]: Process '/sbin/mageia-setup-keyboard --udev' failed with exit code 127. ><1052>[ 29.192523] systemd-udevd[429]: Process '/sbin/mageia-setup-keyboard --udev' failed with exit code 127. ><1052>[ 29.606580] systemd-udevd[416]: Process '/sbin/initqueue --onetime --unique --name console_init_tty0 /lib/udev/console_init /dev/tty0' failed with exit code 1. ><6>[ 31.271436] NET: Registered protocol family 17 ><6>[ 62.394476] device-mapper: uevent: version 1.0.3 ><6>[ 62.394635] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com ><6>[ 82.355328] floppy0: no floppy controllers found ><6>[ 82.676954] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) ><6>[ 82.727872] EXT4-fs (sda5): INFO: recovery required on readonly filesystem ><6>[ 82.727874] EXT4-fs (sda5): write access will be enabled during recovery ><6>[ 82.736787] EXT4-fs (sda5): recovery complete ><6>[ 82.749457] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) ><3>[ 82.792364] EXT2-fs (sda6): error: can't find an ext2 filesystem on dev sda6. ><6>[ 82.852873] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) ><6>[ 82.988430] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) ><6>[ 83.254941] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) ><6>[ 83.570282] SGI XFS with ACLs, security attributes, realtime, no debug enabled ><5>[ 83.606404] XFS (dm-9): Mounting V5 Filesystem ><6>[ 83.694173] XFS (dm-9): Ending clean mount ><5>[ 83.772982] XFS (dm-9): Unmounting Filesystem ><6>[ 83.878763] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) ><6>[ 84.128953] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) ><6>[ 84.414397] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) ><5>[ 84.649191] XFS (dm-4): Mounting V5 Filesystem ><5>[ 84.746541] XFS (dm-4): Starting recovery (logdev: internal) ><5>[ 84.925804] XFS (dm-4): Ending recovery (logdev: internal) ><5>[ 84.990840] XFS (dm-4): Unmounting Filesystem ><6>[ 85.127953] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) ><5>[ 85.230047] XFS (dm-5): Mounting V5 Filesystem ><6>[ 85.414773] XFS (dm-5): Ending clean mount ><5>[ 85.483638] XFS (dm-5): Unmounting Filesystem ><6>[ 301.898203] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: acl ><6>[ 304.642442] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl ><6>[ 304.844785] Adding 6291452k swap on /dev/vg1/swap. Priority:-2 extents:1 across:6291452k FS ><6>[ 586.548379] usb 6-1: USB disconnect, device number 2 ><6>[ 802.096288] usb 2-3: new high-speed USB device number 4 using ehci-pci ><6>[ 802.226719] usb 2-3: New USB device found, idVendor=1307, idProduct=0165, bcdDevice= 1.00 ><6>[ 802.226723] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 ><6>[ 802.226727] usb 2-3: Product: USB Mass Storage Device ><6>[ 802.226729] usb 2-3: Manufacturer: USBest Technology ><6>[ 802.226732] usb 2-3: SerialNumber: 000000000019CB ><6>[ 802.227151] usb-storage 2-3:1.0: USB Mass Storage device detected ><6>[ 802.229209] scsi host7: usb-storage 2-3:1.0 ><5>[ 803.252422] scsi 7:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2 ><5>[ 803.255140] sd 7:0:0:0: [sdc] 3948424 512-byte logical blocks: (2.02 GB/1.88 GiB) ><5>[ 803.256110] sd 7:0:0:0: [sdc] Write Protect is off ><7>[ 803.256116] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 ><3>[ 803.257004] sd 7:0:0:0: [sdc] Asking for cache data failed ><3>[ 803.257009] sd 7:0:0:0: [sdc] Assuming drive cache: write through ><6>[ 803.371384] sdc: sdc1 ><5>[ 803.505856] sd 7:0:0:0: [sdc] Attached SCSI removable disk ><6>[ 1099.988466] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
] kernel/system logger ok <5>[ 0.000000] Linux version 5.1.14-desktop-1.mga7 (iurt@scwx861.mageia.org) (gcc version 8.3.1 20190524 (Mageia 8.3.1-0.20190524.1.mga7)) #1 SMP Sat Jun 22 10:35:14 UTC 2019 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz lang= kbd= vga=791 automatic=method:cdrom audit=0 noiswmd splash quiet <6>[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097bff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000000097c00-0x000000000009ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdd7ffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x00000000bdd80000-0x00000000bdd8efff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x00000000bdd8f000-0x00000000bdddffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x00000000bdde0000-0x00000000bddfffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] SMBIOS 2.5 present. <6>[ 0.000000] DMI: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 207 05/08/2009 <6>[ 0.000000] tsc: Fast TSC calibration using PIT <6>[ 0.000000] tsc: Detected 2000.235 MHz processor <7>[ 0.004036] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.004037] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.004044] last_pfn = 0xbdd80 max_arch_pfn = 0x400000000 <7>[ 0.004051] MTRR default type: uncachable <7>[ 0.004052] MTRR fixed ranges enabled: <7>[ 0.004053] 00000-9FFFF write-back <7>[ 0.004054] A0000-BFFFF uncachable <7>[ 0.004056] C0000-CFFFF write-protect <7>[ 0.004057] D0000-DFFFF uncachable <7>[ 0.004058] E0000-EFFFF write-through <7>[ 0.004059] F0000-FFFFF write-protect <7>[ 0.004059] MTRR variable ranges enabled: <7>[ 0.004061] 0 base 000000000 mask F80000000 write-back <7>[ 0.004063] 1 base 080000000 mask FC0000000 write-back <7>[ 0.004064] 2 base 0BDE00000 mask FFFE00000 uncachable <7>[ 0.004065] 3 base 0BE000000 mask FFE000000 uncachable <7>[ 0.004066] 4 disabled <7>[ 0.004067] 5 disabled <7>[ 0.004068] 6 disabled <7>[ 0.004068] 7 disabled <6>[ 0.004633] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.018345] found SMP MP-table at [mem 0x000ff780-0x000ff78f] <7>[ 0.025436] BRK [0x1ca01000, 0x1ca01fff] PGTABLE <7>[ 0.025438] BRK [0x1ca02000, 0x1ca02fff] PGTABLE <7>[ 0.025440] BRK [0x1ca03000, 0x1ca03fff] PGTABLE <7>[ 0.025490] BRK [0x1ca04000, 0x1ca04fff] PGTABLE <7>[ 0.025493] BRK [0x1ca05000, 0x1ca05fff] PGTABLE <7>[ 0.025718] BRK [0x1ca06000, 0x1ca06fff] PGTABLE <6>[ 0.025763] RAMDISK: [mem 0x33b44000-0x35d99fff] <6>[ 0.025772] ACPI: Early table checksum verification disabled <6>[ 0.025860] ACPI: RSDP 0x00000000000F93E0 000024 (v02 ACPIAM) <6>[ 0.025864] ACPI: XSDT 0x00000000BDD80100 000084 (v01 050809 XSDT1447 20090508 MSFT 00000097) <6>[ 0.025870] ACPI: FACP 0x00000000BDD80290 0000F4 (v03 050809 FACP1447 20090508 MSFT 00000097) <4>[ 0.025875] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20190215/tbfadt-569) <6>[ 0.025880] ACPI: DSDT 0x00000000BDD80680 00C7B4 (v01 K50IJ K50IJ207 00000207 INTL 20051117) <6>[ 0.025884] ACPI: FACS 0x00000000BDD8F000 000040 <6>[ 0.025888] ACPI: FACS 0x00000000BDD8F000 000040 <6>[ 0.025891] ACPI: APIC 0x00000000BDD80390 00005C (v01 050809 APIC1447 20090508 MSFT 00000097) <6>[ 0.025895] ACPI: MCFG 0x00000000BDD80430 00003C (v01 050809 OEMMCFG 20090508 MSFT 00000097) <6>[ 0.025898] ACPI: OEMX 0x00000000BDD80470 000176 (v01 050809 OEMX1447 20090508 MSFT 00000097) <6>[ 0.025902] ACPI: ECDT 0x00000000BDD80620 000054 (v01 050809 OEMECDT 20090508 MSFT 00000097) <6>[ 0.025906] ACPI: DBGP 0x00000000BDD803F0 000034 (v01 050809 DBGP1447 20090508 MSFT 00000097) <6>[ 0.025910] ACPI: BOOT 0x00000000BDD805F0 000028 (v01 050809 BOOT1447 20090508 MSFT 00000097) <6>[ 0.025914] ACPI: OEMB 0x00000000BDD8F040 000071 (v01 050809 OEMB1447 20090508 MSFT 00000097) <6>[ 0.025918] ACPI: HPET 0x00000000BDD8CE40 000038 (v01 050809 OEMHPET 20090508 MSFT 00000097) <6>[ 0.025922] ACPI: GSCI 0x00000000BDD8F0C0 002024 (v01 050809 GMCHSCI 20090508 MSFT 00000097) <6>[ 0.025926] ACPI: ATKG 0x00000000BDD912F0 008024 (v01 022008 OEMATKG 20080220 MSFT 00000097) <6>[ 0.025930] ACPI: SSDT 0x00000000BDD99E00 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) <5>[ 0.025940] ACPI: DMI detected: ASUS K50IJ <7>[ 0.025946] ACPI: Local APIC address 0xfee00000 <6>[ 0.026055] No NUMA configuration found <6>[ 0.026056] Faking a node at [mem 0x0000000000000000-0x00000000bdd7ffff] <6>[ 0.026061] NODE_DATA(0) allocated [mem 0xbdd7c000-0xbdd7ffff] <6>[ 0.026089] Zone ranges: <6>[ 0.026090] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.026091] DMA32 [mem 0x0000000001000000-0x00000000bdd7ffff] <6>[ 0.026093] Normal empty <6>[ 0.026094] Movable zone start for each node <6>[ 0.026095] Early memory node ranges <6>[ 0.026096] node 0: [mem 0x0000000000001000-0x0000000000096fff] <6>[ 0.026097] node 0: [mem 0x0000000000100000-0x00000000bdd7ffff] <6>[ 0.026101] Zeroed struct page in unavailable ranges: 106 pages <6>[ 0.026103] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bdd7ffff] <7>[ 0.026104] On node 0 totalpages: 777494 <7>[ 0.026105] DMA zone: 64 pages used for memmap <7>[ 0.026106] DMA zone: 21 pages reserved <7>[ 0.026107] DMA zone: 3990 pages, LIFO batch:0 <7>[ 0.026249] DMA32 zone: 12086 pages used for memmap <7>[ 0.026250] DMA32 zone: 773504 pages, LIFO batch:63 <6>[ 0.053617] Reserving Intel graphics memory at [mem 0xbe000000-0xbfffffff] <6>[ 0.053975] ACPI: PM-Timer IO Port: 0x808 <7>[ 0.053977] ACPI: Local APIC address 0xfee00000 <6>[ 0.054000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 <6>[ 0.054004] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.054006] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>[ 0.054007] ACPI: IRQ0 used by override. <7>[ 0.054009] ACPI: IRQ9 used by override. <6>[ 0.054011] Using ACPI (MADT) for SMP configuration information <6>[ 0.054013] ACPI: HPET id: 0x8086a301 base: 0xfed00000 <6>[ 0.054021] smpboot: Allowing 2 CPUs, 0 hotplug CPUs <6>[ 0.054039] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.054041] PM: Registered nosave memory: [mem 0x00097000-0x00097fff] <6>[ 0.054042] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff] <6>[ 0.054042] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff] <6>[ 0.054043] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff] <6>[ 0.054046] [mem 0xc0000000-0xfed1ffff] available for PCI devices <6>[ 0.054047] Booting paravirtualized kernel on bare hardware <6>[ 0.054052] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <5>[ 0.275483] random: get_random_bytes called from start_kernel+0x94/0x4fc with crng_init=0 <6>[ 0.275494] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1 <6>[ 0.276469] percpu: Embedded 45 pages/cpu s146328 r8192 d29800 u1048576 <7>[ 0.276478] pcpu-alloc: s146328 r8192 d29800 u1048576 alloc=1*2097152 <7>[ 0.276479] pcpu-alloc: [0] 0 1 <6>[ 0.276510] Built 1 zonelists, mobility grouping on. Total pages: 765323 <6>[ 0.276511] Policy zone: DMA32 <5>[ 0.276514] Kernel command line: BOOT_IMAGE=/boot/vmlinuz lang= kbd= vga=791 automatic=method:cdrom audit=0 noiswmd splash quiet <6>[ 0.276678] audit: disabled (until reboot) <7>[ 0.276816] Calgary: detecting Calgary via BIOS EBDA area <7>[ 0.276817] Calgary: Unable to locate Rio Grande table in EBDA - bailing! <6>[ 0.308241] Memory: 2998472K/3109976K available (12291K kernel code, 1374K rwdata, 3740K rodata, 1628K init, 1532K bss, 111504K reserved, 0K cma-reserved) <6>[ 0.308448] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.308461] Kernel/User page tables isolation: enabled <6>[ 0.308497] ftrace: allocating 36425 entries in 143 pages <6>[ 0.333951] rcu: Hierarchical RCU implementation. <6>[ 0.333954] rcu: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2. <6>[ 0.333955] Tasks RCU enabled. <6>[ 0.333956] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.333957] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.338625] NR_IRQS: 8448, nr_irqs: 440, preallocated irqs: 16 <6>[ 0.338870] Console: colour dummy device 80x25 <6>[ 0.338877] printk: console [tty0] enabled <6>[ 0.338904] ACPI: Core revision 20190215 <4>[ 0.339042] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0x84, should be 0xE5 (20190215/tbprint-177) <6>[ 0.339202] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns <7>[ 0.339214] hpet clockevent registered <6>[ 0.339221] APIC: Switch to symmetric I/O mode setup <6>[ 0.339653] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 0.344220] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cd50c4f3e4, max_idle_ns: 440795246811 ns <6>[ 0.344238] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.47 BogoMIPS (lpj=2000235) <6>[ 0.344240] pid_max: default: 32768 minimum: 301 <6>[ 0.344284] LSM: Security Framework initializing <6>[ 0.346515] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) <6>[ 0.347732] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>[ 0.347798] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) <6>[ 0.347839] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) <5>[ 0.348114] *** VALIDATE proc *** <5>[ 0.348197] *** VALIDATE cgroup1 *** <5>[ 0.348199] *** VALIDATE cgroup2 *** <6>[ 0.348268] process: using mwait in idle threads <6>[ 0.348273] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 <6>[ 0.348275] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 <6>[ 0.348278] Spectre V2 : Mitigation: Full generic retpoline <6>[ 0.348279] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 0.348280] Speculative Store Bypass: Vulnerable <6>[ 0.348320] MDS: Vulnerable: Clear CPU buffers attempted, no microcode <6>[ 0.348515] Freeing SMP alternatives memory: 36K <6>[ 0.351222] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz (family: 0x6, model: 0x17, stepping: 0xa) <6>[ 0.351222] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. <6>[ 0.351222] ... version: 2 <6>[ 0.351222] ... bit width: 40 <6>[ 0.351222] ... generic registers: 2 <6>[ 0.351222] ... value mask: 000000ffffffffff <6>[ 0.351222] ... max period: 000000007fffffff <6>[ 0.351222] ... fixed-purpose events: 3 <6>[ 0.351222] ... event mask: 0000000700000003 <6>[ 0.351222] rcu: Hierarchical SRCU implementation. <6>[ 0.351334] smp: Bringing up secondary CPUs ... <6>[ 0.351506] x86: Booting SMP configuration: <6>[ 0.351508] .... node #0, CPUs: #1 <6>[ 0.352263] smp: Brought up 1 node, 2 CPUs <6>[ 0.352263] smpboot: Max logical packages: 1 <6>[ 0.352263] smpboot: Total of 2 processors activated (8000.94 BogoMIPS) <6>[ 0.353460] devtmpfs: initialized <6>[ 0.353460] x86/mm: Memory block size: 128MB <6>[ 0.354273] PM: Registering ACPI NVS region [mem 0xbdd8f000-0xbdddffff] (331776 bytes) <6>[ 0.354353] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.354353] futex hash table entries: 512 (order: 3, 32768 bytes) <6>[ 0.354353] xor: measuring software checksum speed <6>[ 0.363700] prefetch64-sse: 11464.000 MB/sec <6>[ 0.373701] generic_sse: 9640.000 MB/sec <6>[ 0.373702] xor: using function: prefetch64-sse (11464.000 MB/sec) <6>[ 0.374226] pinctrl core: initialized pinctrl subsystem <6>[ 0.374381] PM: RTC time: 12:29:50, date: 2019-06-25 <6>[ 0.374566] NET: Registered protocol family 16 <6>[ 0.374890] cpuidle: using governor ladder <6>[ 0.374890] cpuidle: using governor menu <6>[ 0.374890] Simple Boot Flag at 0x51 set to 0x1 <6>[ 0.374890] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it <6>[ 0.374890] ACPI: bus type PCI registered <6>[ 0.374890] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.374890] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) <6>[ 0.374890] PCI: not using MMCONFIG <6>[ 0.374890] PCI: Using configuration type 1 for base access <4>[ 0.375385] mtrr: your CPUs had inconsistent variable MTRR settings <6>[ 0.375386] mtrr: probably your BIOS does not setup all CPUs. <6>[ 0.375387] mtrr: corrected configuration. <6>[ 0.376708] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.393226] raid6: sse2x4 gen() 5863 MB/s <6>[ 0.410226] raid6: sse2x4 xor() 4560 MB/s <6>[ 0.427237] raid6: sse2x2 gen() 3488 MB/s <6>[ 0.444229] raid6: sse2x2 xor() 4062 MB/s <6>[ 0.461232] raid6: sse2x1 gen() 3140 MB/s <6>[ 0.478225] raid6: sse2x1 xor() 3433 MB/s <6>[ 0.478226] raid6: using algorithm sse2x4 gen() 5863 MB/s <6>[ 0.478227] raid6: .... xor() 4560 MB/s, rmw enabled <6>[ 0.478229] raid6: using ssse3x2 recovery algorithm <6>[ 0.478346] ACPI: Added _OSI(Module Device) <6>[ 0.478347] ACPI: Added _OSI(Processor Device) <6>[ 0.478348] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 0.478349] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.478351] ACPI: Added _OSI(Linux-Dell-Video) <6>[ 0.478352] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) <6>[ 0.478353] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) <6>[ 0.478354] ACPI: Deleted _OSI(Windows 2009) <6>[ 0.486935] ACPI: 2 ACPI AML tables successfully acquired and loaded <6>[ 0.487516] ACPI: EC: EC started <6>[ 0.487517] ACPI: EC: interrupt blocked <6>[ 0.495619] ACPI: \: Used as first EC <6>[ 0.495621] ACPI: \: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.495622] ACPI: EC: Boot ECDT EC used to handle transactions <5>[ 0.497242] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored <6>[ 0.497640] ACPI: Dynamic OEM Table Load: <6>[ 0.497648] ACPI: SSDT 0xFFFF94897954F400 000206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) <6>[ 0.497999] ACPI: Dynamic OEM Table Load: <6>[ 0.498006] ACPI: SSDT 0xFFFF9489794BB000 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) <6>[ 0.498546] ACPI: Dynamic OEM Table Load: <6>[ 0.498551] ACPI: SSDT 0xFFFF9489794E4E00 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) <6>[ 0.498767] ACPI: Dynamic OEM Table Load: <6>[ 0.498772] ACPI: SSDT 0xFFFF9489794DE000 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) <6>[ 0.499174] ACPI: Interpreter enabled <6>[ 0.499203] ACPI: (supports S0 S3 S4 S5) <6>[ 0.499205] ACPI: Using IOAPIC for interrupt routing <6>[ 0.499259] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) <6>[ 0.500717] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources <6>[ 0.500739] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 0.501062] ACPI: Enabled 14 GPEs in block 00 to 3F <6>[ 0.508896] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) <6>[ 0.508902] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] <6>[ 0.509159] acpi PNP0A08:00: _OSC: platform does not support [LTR] <6>[ 0.509413] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] <6>[ 0.509415] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration <6>[ 0.509674] PCI host bridge to bus 0000:00 <6>[ 0.509677] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 0.509679] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 0.509681] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 0.509682] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] <6>[ 0.509684] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xffffffff window] <6>[ 0.509686] pci_bus 0000:00: root bus resource [bus 00-ff] <7>[ 0.509698] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 <6>[ 0.509731] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset <6>[ 0.509733] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability <7>[ 0.509838] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 <7>[ 0.509854] pci 0000:00:02.0: reg 0x10: [mem 0xfd800000-0xfdbfffff 64bit] <7>[ 0.509862] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] <7>[ 0.509868] pci 0000:00:02.0: reg 0x20: [io 0xcc00-0xcc07] <7>[ 0.509988] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 <7>[ 0.510001] pci 0000:00:02.1: reg 0x10: [mem 0xfdd00000-0xfddfffff 64bit] <7>[ 0.510166] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 <7>[ 0.510240] pci 0000:00:1a.0: reg 0x20: [io 0xc880-0xc89f] <7>[ 0.510405] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 <7>[ 0.510473] pci 0000:00:1a.1: reg 0x20: [io 0xc800-0xc81f] <7>[ 0.510629] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 <7>[ 0.510697] pci 0000:00:1a.2: reg 0x20: [io 0xc480-0xc49f] <7>[ 0.510862] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 <7>[ 0.510892] pci 0000:00:1a.7: reg 0x10: [mem 0xfdefbc00-0xfdefbfff] <7>[ 0.511008] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold <7>[ 0.511129] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 <7>[ 0.511163] pci 0000:00:1b.0: reg 0x10: [mem 0xfdef4000-0xfdef7fff 64bit] <7>[ 0.511290] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold <7>[ 0.511406] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 <7>[ 0.511536] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <7>[ 0.511669] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 <7>[ 0.511807] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold <7>[ 0.511937] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 <7>[ 0.512114] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold <7>[ 0.512252] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 <7>[ 0.512380] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold <7>[ 0.512513] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 <7>[ 0.512688] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold <7>[ 0.512817] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 <7>[ 0.512885] pci 0000:00:1d.0: reg 0x20: [io 0xc400-0xc41f] <7>[ 0.513042] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 <7>[ 0.513110] pci 0000:00:1d.1: reg 0x20: [io 0xc080-0xc09f] <7>[ 0.513272] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 <7>[ 0.513339] pci 0000:00:1d.2: reg 0x20: [io 0xc000-0xc01f] <7>[ 0.513508] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 <7>[ 0.513538] pci 0000:00:1d.7: reg 0x10: [mem 0xfdefb800-0xfdefbbff] <7>[ 0.513652] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold <7>[ 0.513765] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 <7>[ 0.513957] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 <7>[ 0.514201] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 <7>[ 0.514234] pci 0000:00:1f.2: reg 0x10: [io 0xbc00-0xbc07] <7>[ 0.514246] pci 0000:00:1f.2: reg 0x14: [io 0xb880-0xb883] <7>[ 0.514258] pci 0000:00:1f.2: reg 0x18: [io 0xb800-0xb807] <7>[ 0.514269] pci 0000:00:1f.2: reg 0x1c: [io 0xb480-0xb483] <7>[ 0.514280] pci 0000:00:1f.2: reg 0x20: [io 0xb400-0xb41f] <7>[ 0.514292] pci 0000:00:1f.2: reg 0x24: [mem 0xfdefb000-0xfdefb7ff] <7>[ 0.514361] pci 0000:00:1f.2: PME# supported from D3hot <6>[ 0.514532] pci 0000:00:1c.0: PCI bridge to [bus 01] <7>[ 0.514634] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000 <7>[ 0.514683] pci 0000:02:00.0: reg 0x10: [mem 0xfdff0000-0xfdffffff 64bit] <7>[ 0.514865] pci 0000:02:00.0: supports D1 <7>[ 0.514867] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold <6>[ 0.515030] pci 0000:00:1c.1: PCI bridge to [bus 02] <7>[ 0.515037] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff] <6>[ 0.515161] pci 0000:00:1c.2: PCI bridge to [bus 03-04] <7>[ 0.515165] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] <7>[ 0.515170] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfeafffff] <7>[ 0.515178] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfcffffff 64bit pref] <6>[ 0.515244] pci 0000:00:1c.3: PCI bridge to [bus 05] <7>[ 0.515346] pci 0000:06:00.0: [1969:1026] type 00 class 0x020000 <7>[ 0.515392] pci 0000:06:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit] <7>[ 0.515408] pci 0000:06:00.0: reg 0x18: [io 0xec00-0xec7f] <7>[ 0.515559] pci 0000:06:00.0: PME# supported from D3hot D3cold <6>[ 0.515703] pci 0000:00:1c.5: PCI bridge to [bus 06] <7>[ 0.515708] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] <7>[ 0.515713] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff] <6>[ 0.515747] pci_bus 0000:07: extended config space not accessible <6>[ 0.515830] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) <7>[ 0.515844] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) <7>[ 0.515846] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) <7>[ 0.515848] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) <7>[ 0.515853] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) <7>[ 0.515855] pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xffffffff window] (subtractive decode) <6>[ 0.516673] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12) <6>[ 0.516739] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12) <6>[ 0.516803] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) <6>[ 0.516865] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12) <6>[ 0.516929] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled. <6>[ 0.516992] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12) <6>[ 0.517055] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12) <6>[ 0.517119] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12) <6>[ 0.517411] ACPI: EC: interrupt unblocked <6>[ 0.517425] ACPI: EC: event unblocked <6>[ 0.517435] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.517437] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events <6>[ 0.517561] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 0.517561] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 0.517561] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 0.517561] vgaarb: loaded <5>[ 0.517561] SCSI subsystem initialized <7>[ 0.517561] libata version 3.00 loaded. <6>[ 0.517561] EDAC MC: Ver: 3.0.0 <6>[ 0.518255] PCI: Using ACPI for IRQ routing <7>[ 0.528848] PCI: pci_cache_line_size set to 64 bytes <7>[ 0.528930] e820: reserve RAM buffer [mem 0x00097c00-0x0009ffff] <7>[ 0.528932] e820: reserve RAM buffer [mem 0xbdd80000-0xbfffffff] <6>[ 0.529222] NetLabel: Initializing <6>[ 0.529222] NetLabel: domain hash size = 128 <6>[ 0.529222] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 0.529222] NetLabel: unlabeled traffic allowed by default <6>[ 0.529317] HPET: 4 timers in total, 0 timers will be used for per-cpu timer <6>[ 0.529324] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 <6>[ 0.529328] hpet0: 4 comparators, 64-bit 14.318180 MHz counter <6>[ 0.531248] clocksource: Switched to clocksource tsc-early <5>[ 0.557022] VFS: Disk quotas dquot_6.6.0 <6>[ 0.557044] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <5>[ 0.557086] *** VALIDATE hugetlbfs *** <6>[ 0.557155] pnp: PnP ACPI init <6>[ 0.557283] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved <7>[ 0.557292] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) <7>[ 0.557369] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) <7>[ 0.557426] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) <7>[ 0.557500] pnp 00:03: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) <6>[ 0.557739] system 00:04: [io 0x04d0-0x04d1] has been reserved <6>[ 0.557741] system 00:04: [io 0x0800-0x087f] has been reserved <6>[ 0.557743] system 00:04: [io 0x0400-0x041f] has been reserved <6>[ 0.557745] system 00:04: [io 0x0500-0x057f] has been reserved <6>[ 0.557748] system 00:04: [mem 0xfdefac00-0xfdefacff window] has been reserved <6>[ 0.557751] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved <6>[ 0.557753] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved <6>[ 0.557755] system 00:04: [mem 0xfed45000-0xfed89fff] has been reserved <6>[ 0.557757] system 00:04: [mem 0xfed90000-0xfed90fff] has been reserved <6>[ 0.557759] system 00:04: [mem 0xfed91000-0xfed91fff] has been reserved <6>[ 0.557761] system 00:04: [mem 0xfed92000-0xfed92fff] has been reserved <6>[ 0.557763] system 00:04: [mem 0xfed93000-0xfed93fff] has been reserved <6>[ 0.557765] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved <6>[ 0.557768] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved <7>[ 0.557774] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) <6>[ 0.557902] system 00:05: [mem 0xffa00000-0xffbfffff] could not be reserved <6>[ 0.557904] system 00:05: [mem 0xffe00000-0xffffffff] could not be reserved <7>[ 0.557910] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) <6>[ 0.557995] system 00:06: [mem 0xffc00000-0xffdfffff] has been reserved <7>[ 0.558001] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) <6>[ 0.558096] system 00:07: [io 0x0250-0x0253] has been reserved <6>[ 0.558098] system 00:07: [io 0x0256-0x025f] has been reserved <6>[ 0.558101] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved <6>[ 0.558103] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved <6>[ 0.558105] system 00:07: [mem 0xfec10000-0xfec17fff] has been reserved <6>[ 0.558107] system 00:07: [mem 0xfec18000-0xfec1ffff] has been reserved <6>[ 0.558109] system 00:07: [mem 0xfec20000-0xfec27fff] has been reserved <6>[ 0.558111] system 00:07: [mem 0xfec28000-0xfec2ffff] has been reserved <6>[ 0.558113] system 00:07: [mem 0xfec38000-0xfec3ffff] has been reserved <7>[ 0.558119] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) <6>[ 0.558246] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved <7>[ 0.558252] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) <6>[ 0.558618] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved <6>[ 0.558620] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved <6>[ 0.558622] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved <6>[ 0.558624] system 00:09: [mem 0x00100000-0xbddfffff] could not be reserved <7>[ 0.558630] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) <6>[ 0.558782] pnp: PnP ACPI: found 10 devices <6>[ 0.565276] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <7>[ 0.565291] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 <6>[ 0.565309] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbde00000-0xbdffffff 64bit pref] <6>[ 0.565313] pci 0000:00:1c.0: PCI bridge to [bus 01] <6>[ 0.565329] pci 0000:00:1c.1: PCI bridge to [bus 02] <6>[ 0.565335] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff] <6>[ 0.565346] pci 0000:00:1c.2: PCI bridge to [bus 03-04] <6>[ 0.565349] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] <6>[ 0.565355] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfeafffff] <6>[ 0.565360] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfcffffff 64bit pref] <6>[ 0.565368] pci 0000:00:1c.3: PCI bridge to [bus 05] <6>[ 0.565382] pci 0000:00:1c.5: PCI bridge to [bus 06] <6>[ 0.565386] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] <6>[ 0.565391] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff] <6>[ 0.565396] pci 0000:00:1c.5: bridge window [mem 0xbde00000-0xbdffffff 64bit pref] <6>[ 0.565404] pci 0000:00:1e.0: PCI bridge to [bus 07] <7>[ 0.565419] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <7>[ 0.565421] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <7>[ 0.565423] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <7>[ 0.565425] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] <7>[ 0.565426] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xffffffff window] <7>[ 0.565429] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] <7>[ 0.565430] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] <7>[ 0.565432] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfeafffff] <7>[ 0.565434] pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfcffffff 64bit pref] <7>[ 0.565436] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] <7>[ 0.565437] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff] <7>[ 0.565439] pci_bus 0000:06: resource 2 [mem 0xbde00000-0xbdffffff 64bit pref] <7>[ 0.565441] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window] <7>[ 0.565443] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window] <7>[ 0.565444] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window] <7>[ 0.565446] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window] <7>[ 0.565448] pci_bus 0000:07: resource 8 [mem 0xbde00000-0xffffffff window] <6>[ 0.565575] NET: Registered protocol family 2 <6>[ 0.565798] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) <6>[ 0.565827] TCP established hash table entries: 32768 (order: 6, 262144 bytes) <6>[ 0.565950] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) <6>[ 0.566128] TCP: Hash tables configured (established 32768 bind 32768) <6>[ 0.566226] UDP hash table entries: 2048 (order: 4, 65536 bytes) <6>[ 0.566265] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) <6>[ 0.566375] NET: Registered protocol family 1 <6>[ 0.566384] NET: Registered protocol family 44 <6>[ 0.566407] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <7>[ 0.567583] PCI: CLS 32 bytes, default 64 <6>[ 0.567659] Trying to unpack rootfs image as initramfs... <6>[ 3.144678] Freeing initrd memory: 35160K <5>[ 3.145683] Initialise system trusted keyrings <6>[ 3.145773] workingset: timestamp_bits=40 max_order=20 bucket_order=0 <6>[ 3.148752] zbud: loaded <5>[ 3.200257] Key type asymmetric registered <5>[ 3.200260] Asymmetric key parser 'x509' registered <6>[ 3.200288] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 3.200348] io scheduler mq-deadline registered <6>[ 3.200349] io scheduler kyber registered <6>[ 3.200421] io scheduler bfq registered <6>[ 3.200963] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 <6>[ 3.201201] pcieport 0000:00:1c.1: Signaling PME with IRQ 25 <6>[ 3.201458] pcieport 0000:00:1c.2: Signaling PME with IRQ 26 <6>[ 3.201495] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum) <6>[ 3.201845] pcieport 0000:00:1c.3: Signaling PME with IRQ 27 <6>[ 3.202074] pcieport 0000:00:1c.5: Signaling PME with IRQ 28 <6>[ 3.202110] pciehp 0000:00:1c.5:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum) <6>[ 3.202373] vesafb: mode is 1024x768x16, linelength=2048, pages=20 <6>[ 3.202375] vesafb: scrolling: redraw <6>[ 3.202377] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>[ 3.202398] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 3072k, total 32704k <6>[ 3.202537] Console: switching to colour frame buffer device 128x48 <6>[ 3.214577] fb0: VESA VGA frame buffer device <7>[ 3.214606] intel_idle: does not run on family 6 model 23 <7>[ 3.214993] Monitor-Mwait will be used to enter C-1 state <7>[ 3.214999] Monitor-Mwait will be used to enter C-2 state <7>[ 3.215002] Monitor-Mwait will be used to enter C-3 state <6>[ 3.215005] tsc: Marking TSC unstable due to TSC halts in idle <6>[ 3.215097] clocksource: Switched to clocksource hpet <6>[ 3.215670] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 3.216363] Linux agpgart interface v0.103 <6>[ 3.219744] brd: module loaded <7>[ 3.220410] ahci 0000:00:1f.2: version 3.0 <6>[ 3.220631] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled <6>[ 3.220669] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode <6>[ 3.220672] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs <6>[ 3.227064] scsi host0: ahci <6>[ 3.227393] scsi host1: ahci <6>[ 3.227654] scsi host2: ahci <6>[ 3.227902] scsi host3: ahci <6>[ 3.228161] scsi host4: ahci <6>[ 3.228449] scsi host5: ahci <6>[ 3.228601] ata1: SATA max UDMA/133 abar m2048@0xfdefb000 port 0xfdefb100 irq 29 <6>[ 3.228604] ata2: SATA max UDMA/133 abar m2048@0xfdefb000 port 0xfdefb180 irq 29 <6>[ 3.228605] ata3: DUMMY <6>[ 3.228606] ata4: DUMMY <6>[ 3.228607] ata5: DUMMY <6>[ 3.228610] ata6: SATA max UDMA/133 abar m2048@0xfdefb000 port 0xfdefb380 irq 29 <6>[ 3.228942] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 <6>[ 3.232014] i8042: Detected active multiplexing controller, rev 1.1 <6>[ 3.234774] serio: i8042 KBD port at 0x60,0x64 irq 1 <6>[ 3.234781] serio: i8042 AUX0 port at 0x60,0x64 irq 12 <6>[ 3.234822] serio: i8042 AUX1 port at 0x60,0x64 irq 12 <6>[ 3.234854] serio: i8042 AUX2 port at 0x60,0x64 irq 12 <6>[ 3.234885] serio: i8042 AUX3 port at 0x60,0x64 irq 12 <6>[ 3.235093] mousedev: PS/2 mouse device common for all mice <6>[ 3.235169] rtc_cmos 00:01: RTC can wake from S4 <6>[ 3.235400] rtc_cmos 00:01: registered as rtc0 <6>[ 3.235423] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs <6>[ 3.235439] intel_pstate: CPU model not supported <6>[ 3.235480] ledtrig-cpu: registered to indicate activity on CPUs <5>[ 3.235728] Key type dns_resolver registered <6>[ 3.235730] mpls_gso: MPLS GSO support <6>[ 3.235891] mce: Using 6 MCE banks <6>[ 3.235943] microcode: sig=0x1067a, pf=0x80, revision=0xa07 <6>[ 3.236026] microcode: Microcode Update Driver: v2.2. <6>[ 3.236267] registered taskstats version 1 <5>[ 3.236268] Loading compiled-in X.509 certificates <6>[ 3.236321] zswap: loaded using pool lzo/zbud <6>[ 3.237091] Btrfs loaded, crc32c=crc32c-generic <5>[ 3.242935] Key type encrypted registered <6>[ 3.243482] PM: Magic number: 7:78:482 <6>[ 3.243648] rtc_cmos 00:01: setting system clock to 2019-06-25T12:29:53 UTC (1561465793) <6>[ 3.243762] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found <4>[ 3.243842] Unstable clock detected, switching default tracing clock to "global" <4>[ 3.243842] If you want to keep using the local clock, then add: <4>[ 3.243842] "trace_clock=local" <4>[ 3.243842] on the kernel command line <6>[ 3.274908] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <6>[ 3.538206] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <6>[ 3.539247] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out <7>[ 3.539457] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded <6>[ 3.539460] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out <6>[ 3.796282] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133 <6>[ 3.796284] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32) <6>[ 3.798369] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out <7>[ 3.810521] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded <6>[ 3.810524] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out <6>[ 3.812340] ata1.00: configured for UDMA/133 <5>[ 3.812643] scsi 0:0:0:0: Direct-Access ATA ST9250315AS SDM1 PQ: 0 ANSI: 5 <5>[ 3.812993] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) <5>[ 3.813025] sd 0:0:0:0: [sda] Write Protect is off <7>[ 3.813028] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>[ 3.813097] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 3.884479] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > <5>[ 3.885333] sd 0:0:0:0: [sda] Attached SCSI disk <6>[ 4.122183] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <7>[ 4.123929] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded <6>[ 4.123932] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out <6>[ 4.125818] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.00, max UDMA/100 <7>[ 4.129918] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded <6>[ 4.129920] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out <6>[ 4.131854] ata2.00: configured for UDMA/100 <5>[ 4.135252] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.00 PQ: 0 ANSI: 5 <5>[ 4.149261] random: fast init done <6>[ 4.466179] ata6: SATA link down (SStatus 0 SControl 300) <6>[ 4.467994] Freeing unused kernel image memory: 1628K <6>[ 4.472309] Write protecting the kernel read-only data: 18432k <6>[ 4.473665] Freeing unused kernel image memory: 2020K <6>[ 4.473995] Freeing unused kernel image memory: 356K <6>[ 4.491219] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 4.491251] x86/mm: Checking user space page tables <6>[ 4.508004] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 4.508008] Run /init as init process <30>[ 4.616539] dracut: dracut-046 <6>[ 4.925888] battery: ACPI: Battery Slot [BAT0] (battery absent) <5>[ 5.051416] asus_laptop: Asus Laptop Support version 0.42 <5>[ 5.051531] asus_laptop: K50IJ model detected <6>[ 5.058524] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5 <6>[ 5.116741] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray <6>[ 5.116745] cdrom: Uniform CD-ROM driver Revision: 3.20 <7>[ 5.117020] sr 1:0:0:0: Attached scsi CD-ROM sr0 <6>[ 5.161992] ACPI: bus type USB registered <6>[ 5.162025] usbcore: registered new interface driver usbfs <6>[ 5.162039] usbcore: registered new interface driver hub <6>[ 5.172576] usbcore: registered new device driver usb <6>[ 5.190552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 5.191430] ehci-pci: EHCI PCI platform driver <6>[ 5.191605] ehci-pci 0000:00:1a.7: EHCI Host Controller <6>[ 5.191617] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 <6>[ 5.191635] ehci-pci 0000:00:1a.7: debug port 1 <7>[ 5.195540] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported <6>[ 5.195567] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdefbc00 <6>[ 5.202261] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 <6>[ 5.202359] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 <6>[ 5.202361] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.202363] usb usb1: Product: EHCI Host Controller <6>[ 5.202365] usb usb1: Manufacturer: Linux 5.1.14-desktop-1.mga7 ehci_hcd <6>[ 5.202366] usb usb1: SerialNumber: 0000:00:1a.7 <6>[ 5.202579] hub 1-0:1.0: USB hub found <6>[ 5.202590] hub 1-0:1.0: 6 ports detected <6>[ 5.203015] ehci-pci 0000:00:1d.7: EHCI Host Controller <6>[ 5.203024] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 <6>[ 5.203039] ehci-pci 0000:00:1d.7: debug port 1 <7>[ 5.206953] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported <6>[ 5.206982] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdefb800 <6>[ 5.213259] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 <6>[ 5.213384] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 <6>[ 5.213386] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.213388] usb usb2: Product: EHCI Host Controller <6>[ 5.213390] usb usb2: Manufacturer: Linux 5.1.14-desktop-1.mga7 ehci_hcd <6>[ 5.213392] usb usb2: SerialNumber: 0000:00:1d.7 <6>[ 5.213590] hub 2-0:1.0: USB hub found <6>[ 5.213604] hub 2-0:1.0: 6 ports detected <6>[ 5.278195] uhci_hcd: USB Universal Host Controller Interface driver <6>[ 5.280447] uhci_hcd 0000:00:1a.0: UHCI Host Controller <6>[ 5.280457] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 <6>[ 5.280467] uhci_hcd 0000:00:1a.0: detected 2 ports <6>[ 5.280507] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880 <6>[ 5.280592] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 <6>[ 5.280594] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.280596] usb usb3: Product: UHCI Host Controller <6>[ 5.280598] usb usb3: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd <6>[ 5.280599] usb usb3: SerialNumber: 0000:00:1a.0 <6>[ 5.280763] hub 3-0:1.0: USB hub found <6>[ 5.280773] hub 3-0:1.0: 2 ports detected <6>[ 5.282462] uhci_hcd 0000:00:1a.1: UHCI Host Controller <6>[ 5.282473] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 <6>[ 5.282483] uhci_hcd 0000:00:1a.1: detected 2 ports <6>[ 5.282519] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800 <6>[ 5.285373] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 <6>[ 5.285376] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.285378] usb usb4: Product: UHCI Host Controller <6>[ 5.285380] usb usb4: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd <6>[ 5.285382] usb usb4: SerialNumber: 0000:00:1a.1 <6>[ 5.285640] hub 4-0:1.0: USB hub found <6>[ 5.285920] hub 4-0:1.0: 2 ports detected <6>[ 5.287989] uhci_hcd 0000:00:1a.2: UHCI Host Controller <6>[ 5.288012] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 <6>[ 5.288025] uhci_hcd 0000:00:1a.2: detected 2 ports <6>[ 5.288071] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480 <6>[ 5.289306] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 <6>[ 5.289308] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.289310] usb usb5: Product: UHCI Host Controller <6>[ 5.289312] usb usb5: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd <6>[ 5.289314] usb usb5: SerialNumber: 0000:00:1a.2 <6>[ 5.292607] hub 5-0:1.0: USB hub found <6>[ 5.292627] hub 5-0:1.0: 2 ports detected <6>[ 5.292940] uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>[ 5.292948] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 <6>[ 5.292956] uhci_hcd 0000:00:1d.0: detected 2 ports <6>[ 5.292984] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400 <6>[ 5.293058] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 <6>[ 5.293060] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.293062] usb usb6: Product: UHCI Host Controller <6>[ 5.293064] usb usb6: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd <6>[ 5.293065] usb usb6: SerialNumber: 0000:00:1d.0 <6>[ 5.293209] hub 6-0:1.0: USB hub found <6>[ 5.293219] hub 6-0:1.0: 2 ports detected <6>[ 5.294841] uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>[ 5.294852] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 <6>[ 5.294864] uhci_hcd 0000:00:1d.1: detected 2 ports <6>[ 5.294891] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080 <6>[ 5.294986] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 <6>[ 5.294988] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.294990] usb usb7: Product: UHCI Host Controller <6>[ 5.294992] usb usb7: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd <6>[ 5.294994] usb usb7: SerialNumber: 0000:00:1d.1 <6>[ 5.295193] hub 7-0:1.0: USB hub found <6>[ 5.295208] hub 7-0:1.0: 2 ports detected <6>[ 5.296539] uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>[ 5.296549] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 <6>[ 5.296560] uhci_hcd 0000:00:1d.2: detected 2 ports <6>[ 5.296586] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000 <6>[ 5.297573] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 <6>[ 5.297576] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.297578] usb usb8: Product: UHCI Host Controller <6>[ 5.297580] usb usb8: Manufacturer: Linux 5.1.14-desktop-1.mga7 uhci_hcd <6>[ 5.297582] usb usb8: SerialNumber: 0000:00:1d.2 <6>[ 5.299559] hub 8-0:1.0: USB hub found <6>[ 5.299737] hub 8-0:1.0: 2 ports detected <6>[ 5.316661] ATL1E 0000:06:00.0 enp6s0: renamed from eth0 <5>[ 5.336281] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 5.359550] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 5.359607] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 5.359610] cfg80211: failed to load regulatory.db <6>[ 5.518986] ath: phy0: Enable LNA combining <6>[ 5.521561] ath: phy0: ASPM enabled: 0x42 <7>[ 5.521564] ath: EEPROM regdomain: 0x60 <7>[ 5.521565] ath: EEPROM indicates we should expect a direct regpair map <7>[ 5.521567] ath: Country alpha2 being used: 00 <7>[ 5.521568] ath: Regpair used: 0x60 <7>[ 5.530047] ieee80211 phy0: Failed to initialize wep: -2 <7>[ 5.530340] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' <6>[ 5.530677] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa61300920000, irq=17 <6>[ 5.533050] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 <6>[ 5.538264] usb 1-3: new high-speed USB device number 2 using ehci-pci <6>[ 5.710788] usb 1-3: New USB device found, idVendor=04f2, idProduct=b071, bcdDevice=15.15 <6>[ 5.710791] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 <6>[ 5.710793] usb 1-3: Product: CNF7129 <6>[ 5.710794] usb 1-3: Manufacturer: Chicony Electronics Co., Ltd. <6>[ 5.710796] usb 1-3: SerialNumber: SN0001 <6>[ 5.719632] media: Linux media interface: v0.10 <6>[ 5.737630] videodev: Linux video capture interface: v2.00 <6>[ 5.969297] usb 6-1: new full-speed USB device number 2 using uhci_hcd <6>[ 6.151350] usb 6-1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 <6>[ 6.151354] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>[ 6.151357] usb 6-1: Product: USB Receiver <6>[ 6.151360] usb 6-1: Manufacturer: Logitech <6>[ 6.172104] hidraw: raw HID events driver (C) Jiri Kosina <6>[ 6.183998] usbcore: registered new interface driver usbhid <6>[ 6.184000] usbhid: USB HID core driver <6>[ 6.186765] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:046D:C534.0001/input/input10 <6>[ 6.238463] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 <6>[ 6.239493] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:046D:C534.0002/input/input11 <6>[ 6.239696] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:046D:C534.0002/input/input12 <6>[ 6.291484] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:046D:C534.0002/input/input13 <6>[ 6.291770] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 <6>[ 6.429263] usb 2-2: new high-speed USB device number 3 using ehci-pci <6>[ 6.566423] usb 2-2: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.0b <6>[ 6.566426] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 6.566429] usb 2-2: Product: Intenso Alu Line <6>[ 6.566431] usb 2-2: Manufacturer: Alcor Tech <6>[ 6.566433] usb 2-2: SerialNumber: 13082600010352 <6>[ 6.578335] usb-storage 2-2:1.0: USB Mass Storage device detected <6>[ 6.578534] scsi host6: usb-storage 2-2:1.0 <6>[ 6.578683] usbcore: registered new interface driver usb-storage <6>[ 6.580894] usbcore: registered new interface driver uas <5>[ 7.606360] scsi 6:0:0:0: Direct-Access Intenso Alu Line 8.07 PQ: 0 ANSI: 4 <5>[ 7.608449] sd 6:0:0:0: [sdb] 15257600 512-byte logical blocks: (7.81 GB/7.28 GiB) <5>[ 7.609576] sd 6:0:0:0: [sdb] Write Protect is off <7>[ 7.609582] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 <5>[ 7.610712] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA <5>[ 7.616698] random: crng init done <6>[ 7.616711] sdb: sdb1 sdb2 <5>[ 7.620458] sd 6:0:0:0: [sdb] Attached SCSI removable disk <6>[ 9.932516] Uniform Multi-Platform E-IDE driver <6>[ 9.935536] ide-cd driver 5.00 <4>[ 20.564817] ISOFS: Unable to identify CD-ROM format. <7>[ 20.587441] ISO 9660 Extensions: Microsoft Joliet Level 3 <7>[ 20.594081] ISO 9660 Extensions: RRIP_1991A <6>[ 26.214130] loop: module loaded <6>[ 26.380829] squashfs: version 4.0 (2009/01/31) Phillip Lougher <30>[ 26.428695] dracut: Mounted root filesystem none <30>[ 26.519811] dracut: Switching root <1054>[ 28.982827] systemd-udevd[424]: Using default interface naming scheme 'v240'. <1054>[ 28.991965] systemd-udevd[422]: Using default interface naming scheme 'v240'. <1052>[ 29.102225] systemd-udevd[422]: Process '/sbin/mageia-setup-keyboard --udev' failed with exit code 127. <1052>[ 29.103938] systemd-udevd[421]: Process '/sbin/mageia-setup-keyboard --udev' failed with exit code 127. <1052>[ 29.126601] systemd-udevd[415]: Process '/sbin/mageia-setup-keyboard --udev' failed with exit code 127. <1052>[ 29.151346] systemd-udevd[417]: Process '/sbin/mageia-setup-keyboard --udev' failed with exit code 127. <1052>[ 29.192523] systemd-udevd[429]: Process '/sbin/mageia-setup-keyboard --udev' failed with exit code 127. <1052>[ 29.606580] systemd-udevd[416]: Process '/sbin/initqueue --onetime --unique --name console_init_tty0 /lib/udev/console_init /dev/tty0' failed with exit code 1. <6>[ 31.271436] NET: Registered protocol family 17 <6>[ 62.394476] device-mapper: uevent: version 1.0.3 <6>[ 62.394635] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com <6>[ 82.355328] floppy0: no floppy controllers found <6>[ 82.676954] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) <6>[ 82.727872] EXT4-fs (sda5): INFO: recovery required on readonly filesystem <6>[ 82.727874] EXT4-fs (sda5): write access will be enabled during recovery <6>[ 82.736787] EXT4-fs (sda5): recovery complete <6>[ 82.749457] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) <3>[ 82.792364] EXT2-fs (sda6): error: can't find an ext2 filesystem on dev sda6. <6>[ 82.852873] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) <6>[ 82.988430] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) <6>[ 83.254941] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) <6>[ 83.570282] SGI XFS with ACLs, security attributes, realtime, no debug enabled <5>[ 83.606404] XFS (dm-9): Mounting V5 Filesystem <6>[ 83.694173] XFS (dm-9): Ending clean mount <5>[ 83.772982] XFS (dm-9): Unmounting Filesystem <6>[ 83.878763] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) <6>[ 84.128953] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) <6>[ 84.414397] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) <5>[ 84.649191] XFS (dm-4): Mounting V5 Filesystem <5>[ 84.746541] XFS (dm-4): Starting recovery (logdev: internal) <5>[ 84.925804] XFS (dm-4): Ending recovery (logdev: internal) <5>[ 84.990840] XFS (dm-4): Unmounting Filesystem <6>[ 85.127953] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) <5>[ 85.230047] XFS (dm-5): Mounting V5 Filesystem <6>[ 85.414773] XFS (dm-5): Ending clean mount <5>[ 85.483638] XFS (dm-5): Unmounting Filesystem <6>[ 301.898203] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: acl <6>[ 304.642442] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl <6>[ 304.844785] Adding 6291452k swap on /dev/vg1/swap. Priority:-2 extents:1 across:6291452k FS <6>[ 586.548379] usb 6-1: USB disconnect, device number 2 <6>[ 802.096288] usb 2-3: new high-speed USB device number 4 using ehci-pci <6>[ 802.226719] usb 2-3: New USB device found, idVendor=1307, idProduct=0165, bcdDevice= 1.00 <6>[ 802.226723] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 802.226727] usb 2-3: Product: USB Mass Storage Device <6>[ 802.226729] usb 2-3: Manufacturer: USBest Technology <6>[ 802.226732] usb 2-3: SerialNumber: 000000000019CB <6>[ 802.227151] usb-storage 2-3:1.0: USB Mass Storage device detected <6>[ 802.229209] scsi host7: usb-storage 2-3:1.0 <5>[ 803.252422] scsi 7:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2 <5>[ 803.255140] sd 7:0:0:0: [sdc] 3948424 512-byte logical blocks: (2.02 GB/1.88 GiB) <5>[ 803.256110] sd 7:0:0:0: [sdc] Write Protect is off <7>[ 803.256116] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 <3>[ 803.257004] sd 7:0:0:0: [sdc] Asking for cache data failed <3>[ 803.257009] sd 7:0:0:0: [sdc] Assuming drive cache: write through <6>[ 803.371384] sdc: sdc1 <5>[ 803.505856] sd 7:0:0:0: [sdc] Attached SCSI removable disk <6>[ 1099.988466] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
View Attachment As Raw
Actions:
View
Attachments on
bug 25001
:
11125
| 11126 |
11127