Attachment 10631 Details for Bug 24089 – Smartmontools test result log

Smartmontools test result log

smart_result.log (text/plain), 5.74 KB, created by Augier on 2019-01-01 18:15:34 CET

(hide)

Description:

Filename:

MIME Type:

Creator: Augier

Created: 2019-01-01 18:15:34 CET

Size: 5.74 KB

patch

obsolete

>smartctl -s on -a /dev/sda
>smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.56-desktop-1.mga6] (local build)
>Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>
>=== START OF INFORMATION SECTION ===
>Device Model:     KingFast
>Serial Number:    0127201631063
>Firmware Version: KFS10010
>User Capacity:    120 034 123 776 bytes [120 GB]
>Sector Size:      512 bytes logical/physical
>Rotation Rate:    Solid State Device
>Device is:        Not in smartctl database [for details use: -P showall]
>ATA Version is:   ACS-2 (minor revision not indicated)
>SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
>Local Time is:    Tue Jan  1 18:03:00 2019 CET
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF ENABLE/DISABLE COMMANDS SECTION ===
>SMART Enabled.
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x02)	Offline data collection activity
>					was completed without error.
>					Auto Offline Data Collection: Disabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		(   57) seconds.
>Offline data collection
>capabilities: 			 (0x71) SMART execute Offline immediate.
>					No Auto Offline data collection support.
>					Suspend Offline collection upon new
>					command.
>					No Offline surface scan supported.
>					Self-test supported.
>					Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0002)	Does not save SMART data before
>					entering power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   1) minutes.
>Extended self-test routine
>recommended polling time: 	 (   1) minutes.
>Conveyance self-test routine
>recommended polling time: 	 (   1) minutes.
>
>SMART Attributes Data Structure revision number: 1
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x0000   100   100   000    Old_age   Offline      -       0
>  5 Reallocated_Sector_Ct   0x0000   100   100   000    Old_age   Offline      -       0
>  9 Power_On_Hours          0x0000   100   100   000    Old_age   Offline      -       744
> 12 Power_Cycle_Count       0x0000   100   100   000    Old_age   Offline      -       1516
>160 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
>161 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       129
>163 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       9
>164 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       11074
>165 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       52
>166 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
>167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       10
>168 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       3000
>169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       100
>175 Program_Fail_Count_Chip 0x0000   100   100   000    Old_age   Offline      -       0
>176 Erase_Fail_Count_Chip   0x0000   100   100   000    Old_age   Offline      -       0
>177 Wear_Leveling_Count     0x0000   100   100   050    Old_age   Offline      -       0
>178 Used_Rsvd_Blk_Cnt_Chip  0x0000   100   100   000    Old_age   Offline      -       0
>181 Program_Fail_Cnt_Total  0x0000   100   100   000    Old_age   Offline      -       0
>182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age   Offline      -       0
>192 Power-Off_Retract_Count 0x0000   100   100   000    Old_age   Offline      -       134
>194 Temperature_Celsius     0x0000   100   100   000    Old_age   Offline      -       40
>195 Hardware_ECC_Recovered  0x0000   100   100   000    Old_age   Offline      -       0
>196 Reallocated_Event_Count 0x0000   100   100   016    Old_age   Offline      -       0
>197 Current_Pending_Sector  0x0000   100   100   000    Old_age   Offline      -       0
>198 Offline_Uncorrectable   0x0000   100   100   000    Old_age   Offline      -       0
>199 UDMA_CRC_Error_Count    0x0000   100   100   050    Old_age   Offline      -       0
>232 Available_Reservd_Space 0x0000   100   100   000    Old_age   Offline      -       100
>241 Total_LBAs_Written      0x0000   100   100   000    Old_age   Offline      -       19774
>242 Total_LBAs_Read         0x0000   100   100   000    Old_age   Offline      -       39248
>245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       44296
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
># 1  Extended offline    Completed without error       00%       231         -
># 2  Short offline       Completed without error       00%       231         -
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>    7        0    65535  Read_scanning was completed without error
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.

smartctl -s on -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.56-desktop-1.mga6] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     KingFast
Serial Number:    0127201631063
Firmware Version: KFS10010
User Capacity:    120 034 123 776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Jan  1 18:03:00 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   57) seconds.
Offline data collection
capabilities: 			 (0x71) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (   1) minutes.
Conveyance self-test routine
recommended polling time: 	 (   1) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0000   100   100   000    Old_age   Offline      -       0
  5 Reallocated_Sector_Ct   0x0000   100   100   000    Old_age   Offline      -       0
  9 Power_On_Hours          0x0000   100   100   000    Old_age   Offline      -       744
 12 Power_Cycle_Count       0x0000   100   100   000    Old_age   Offline      -       1516
160 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
161 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       129
163 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       9
164 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       11074
165 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       52
166 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       10
168 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       3000
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       100
175 Program_Fail_Count_Chip 0x0000   100   100   000    Old_age   Offline      -       0
176 Erase_Fail_Count_Chip   0x0000   100   100   000    Old_age   Offline      -       0
177 Wear_Leveling_Count     0x0000   100   100   050    Old_age   Offline      -       0
178 Used_Rsvd_Blk_Cnt_Chip  0x0000   100   100   000    Old_age   Offline      -       0
181 Program_Fail_Cnt_Total  0x0000   100   100   000    Old_age   Offline      -       0
182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age   Offline      -       0
192 Power-Off_Retract_Count 0x0000   100   100   000    Old_age   Offline      -       134
194 Temperature_Celsius     0x0000   100   100   000    Old_age   Offline      -       40
195 Hardware_ECC_Recovered  0x0000   100   100   000    Old_age   Offline      -       0
196 Reallocated_Event_Count 0x0000   100   100   016    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0000   100   100   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0000   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0000   100   100   050    Old_age   Offline      -       0
232 Available_Reservd_Space 0x0000   100   100   000    Old_age   Offline      -       100
241 Total_LBAs_Written      0x0000   100   100   000    Old_age   Offline      -       19774
242 Total_LBAs_Read         0x0000   100   100   000    Old_age   Offline      -       39248
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       44296

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%       231         -
# 2  Short offline       Completed without error       00%       231         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
    7        0    65535  Read_scanning was completed without error
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Actions: View

Attachments on bug 24089: 10631 | 10634 | 10646