Attachment 106 Details for Bug 357 – dmesg output

dmesg output

dmesg.txt (text/plain), 35.69 KB, created by Rémy CLOUARD (shikamaru) on 2011-03-13 10:17:01 CET

(hide)

Description:

Filename:

MIME Type:

Creator: Rémy CLOUARD (shikamaru)

Created: 2011-03-13 10:17:01 CET

Size: 35.69 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.37-desktop-3.mga (iurt@ecosse.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Tue Jan 25 14:16:42 UTC 2011
>Command line: BOOT_IMAGE=/vmlinuz-2.6.37-desktop-3.mga root=/dev/mapper/kaze-mandriva ro splash=silent 3
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000e4000000 - 00000000e6000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>DMI: GA-N650SLI-DS4L/GA-N650SLI-DS4L, BIOS F2 10/12/2007
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CBFFF write-protect
>  CC000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>found SMP MP-table at [ffff8800000f4cc0] f4cc0
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-000000007fff0000
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007fff0000 page 4k
>kernel direct mapping tables up to 7fff0000 @ 1fffc000-20000000
>RAMDISK: 37ab5000 - 37ff0000
>ACPI: RSDP 00000000000f65c0 00014 (v00 GBT   )
>ACPI: RSDT 000000007fff3040 0003C (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
>ACPI: FACP 000000007fff30c0 00074 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
>ACPI: DSDT 000000007fff3180 04653 (v01 GBT    NVDAACPI 00001000 MSFT 0100000C)
>ACPI: FACS 000000007fff0000 00040
>ACPI: HPET 000000007fff7940 00038 (v01 GBT    NVDAACPI 42302E31 NVDA 00000098)
>ACPI: MCFG 000000007fff79c0 0003C (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
>ACPI: APIC 000000007fff7840 00098 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
>ACPI: SSDT 000000007fff7a40 0015C (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
>ACPI: SSDT 000000007fff7ed0 00275 (v01  PmRef    CpuPm 00003000 INTL 20040311)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fff0000
>Initmem setup node 0 0000000000000000-000000007fff0000
>  NODE_DATA [000000007ffeb000 - 000000007ffeffff]
> [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   empty
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007fff0
>On node 0 totalpages: 524159
>  DMA zone: 56 pages used for memmap
>  DMA zone: 6 pages reserved
>  DMA zone: 3921 pages, LIFO batch:0
>  DMA32 zone: 7112 pages used for memmap
>  DMA32 zone: 513064 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:64000000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82176 r8192 d24320 u524288
>pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516985
>Policy zone: DMA32
>Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.37-desktop-3.mga root=/dev/mapper/kaze-mandriva ro splash=silent 3
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2052364k/2097088k available (4147k kernel code, 452k absent, 44272k reserved, 3174k data, 712k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>NR_IRQS:2304
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 20971520 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2333.618 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4667.23 BogoMIPS (lpj=2333618)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
>PEBS disabled due to CPU errata.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>ACPI: Checking initramfs for custom DSDT
>ACPI: Core revision 20101013
>ftrace: allocating 16306 entries in 64 pages
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
>Booting Node   0, Processors  #1
>Brought up 2 CPUs
>Total of 2 processors activated (9333.65 BogoMIPS).
>devtmpfs: initialized
>Time:  9:12:47  Date: 03/13/11
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe4000000-0xe5ffffff] (base 0xe4000000)
>PCI: MMCONFIG at [mem 0xe4000000-0xe5ffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: SSDT 000000007fff7e40 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
>ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
>ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
>ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
>ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
>ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
>ACPI: No dock devices found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
>pci 0000:00:00.0: [10de:03a3] type 0 class 0x000600
>pci 0000:00:00.1: [10de:03ac] type 0 class 0x000500
>pci 0000:00:00.2: [10de:03aa] type 0 class 0x000500
>pci 0000:00:00.3: [10de:03a9] type 0 class 0x000500
>pci 0000:00:00.4: [10de:03ab] type 0 class 0x000500
>pci 0000:00:00.5: [10de:03a8] type 0 class 0x000500
>pci 0000:00:00.6: [10de:03b5] type 0 class 0x000500
>pci 0000:00:00.7: [10de:03b4] type 0 class 0x000500
>pci 0000:00:01.0: [10de:03ad] type 0 class 0x000500
>pci 0000:00:01.1: [10de:03ae] type 0 class 0x000500
>pci 0000:00:01.2: [10de:03af] type 0 class 0x000500
>pci 0000:00:01.3: [10de:03b0] type 0 class 0x000500
>pci 0000:00:01.4: [10de:03b1] type 0 class 0x000500
>pci 0000:00:01.5: [10de:03b2] type 0 class 0x000500
>pci 0000:00:01.6: [10de:03b3] type 0 class 0x000500
>pci 0000:00:02.0: [10de:03b6] type 0 class 0x000500
>pci 0000:00:02.1: [10de:03bc] type 0 class 0x000500
>pci 0000:00:02.2: [10de:03ba] type 0 class 0x000500
>pci 0000:00:03.0: [10de:03b7] type 1 class 0x000604
>pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:03.0: PME# disabled
>pci 0000:00:09.0: [10de:0270] type 0 class 0x000500
>pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601
>pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05
>pci 0000:00:0a.1: reg 20: [io  0x1c00-0x1c3f]
>pci 0000:00:0a.1: reg 24: [io  0x1c80-0x1cbf]
>pci 0000:00:0a.1: PME# supported from D3hot D3cold
>pci 0000:00:0a.1: PME# disabled
>pci 0000:00:0a.2: [10de:0272] type 0 class 0x000500
>pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03
>pci 0000:00:0b.0: reg 10: [mem 0xe6106000-0xe6106fff]
>pci 0000:00:0b.0: supports D1 D2
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03
>pci 0000:00:0b.1: reg 10: [mem 0xe6107000-0xe61070ff]
>pci 0000:00:0b.1: supports D1 D2
>pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.1: PME# disabled
>pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101
>pci 0000:00:0d.0: reg 20: [io  0xf000-0xf00f]
>pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101
>pci 0000:00:0e.0: reg 10: [io  0x09f0-0x09f7]
>pci 0000:00:0e.0: reg 14: [io  0x0bf0-0x0bf3]
>pci 0000:00:0e.0: reg 18: [io  0x0970-0x0977]
>pci 0000:00:0e.0: reg 1c: [io  0x0b70-0x0b73]
>pci 0000:00:0e.0: reg 20: [io  0xe600-0xe60f]
>pci 0000:00:0e.0: reg 24: [mem 0xe6104000-0xe6104fff]
>pci 0000:00:0f.0: [10de:0267] type 0 class 0x000101
>pci 0000:00:0f.0: reg 10: [io  0x09e0-0x09e7]
>pci 0000:00:0f.0: reg 14: [io  0x0be0-0x0be3]
>pci 0000:00:0f.0: reg 18: [io  0x0960-0x0967]
>pci 0000:00:0f.0: reg 1c: [io  0x0b60-0x0b63]
>pci 0000:00:0f.0: reg 20: [io  0xeb00-0xeb0f]
>pci 0000:00:0f.0: reg 24: [mem 0xe6105000-0xe6105fff]
>pci 0000:00:10.0: [10de:026f] type 1 class 0x000604
>pci 0000:00:10.1: [10de:026c] type 0 class 0x000403
>pci 0000:00:10.1: reg 10: [mem 0xe6100000-0xe6103fff]
>pci 0000:00:10.1: PME# supported from D3hot D3cold
>pci 0000:00:10.1: PME# disabled
>pci 0000:00:14.0: [10de:0269] type 0 class 0x000680
>pci 0000:00:14.0: reg 10: [mem 0xe6108000-0xe6108fff]
>pci 0000:00:14.0: reg 14: [io  0xec00-0xec07]
>pci 0000:00:14.0: supports D1 D2
>pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:14.0: PME# disabled
>pci 0000:01:00.0: [10de:0400] type 0 class 0x000300
>pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
>pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit]
>pci 0000:01:00.0: reg 24: [io  0xd000-0xd07f]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:00:03.0: PCI bridge to [bus 01-01]
>pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xe3ffffff]
>pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:07.0: [1814:0302] type 0 class 0x000280
>pci 0000:02:07.0: reg 10: [mem 0xe6000000-0xe6007fff]
>pci 0000:00:10.0: PCI bridge to [bus 02-02] (subtractive decode)
>pci 0000:00:10.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:10.0:   bridge window [mem 0xe6000000-0xe60fffff]
>pci 0000:00:10.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:10.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:10.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>HEST: Table is not found!
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009f800 - 000000000009ffff 
>reserve RAM buffer: 000000007fff0000 - 000000007fffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
>hpet0: 3 comparators, 32-bit 25.000000 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-1f]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000dffff window]
>pnp 00:00: [mem 0x80000000-0xfebfffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [io  0x1000-0x107f]
>pnp 00:01: [io  0x1080-0x10ff]
>pnp 00:01: [io  0x1400-0x147f]
>pnp 00:01: [io  0x1480-0x14ff]
>pnp 00:01: [io  0x1800-0x187f]
>pnp 00:01: [io  0x1880-0x18ff]
>pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [io  0x0010-0x001f]
>pnp 00:02: [io  0x0022-0x003f]
>pnp 00:02: [io  0x0044-0x005f]
>pnp 00:02: [io  0x0062-0x0063]
>pnp 00:02: [io  0x0065-0x006f]
>pnp 00:02: [io  0x0074-0x007f]
>pnp 00:02: [io  0x0091-0x0093]
>pnp 00:02: [io  0x00a2-0x00bf]
>pnp 00:02: [io  0x00e0-0x00ef]
>pnp 00:02: [io  0x04d0-0x04d1]
>pnp 00:02: [io  0x0800-0x087f]
>pnp 00:02: [io  0x0295-0x0314]
>pnp 00:02: [io  0x0290-0x0294]
>pnp 00:02: [io  0x0880-0x088f]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:03: [dma 4]
>pnp 00:03: [io  0x0000-0x000f]
>pnp 00:03: [io  0x0080-0x0090]
>pnp 00:03: [io  0x0094-0x009f]
>pnp 00:03: [io  0x00c0-0x00df]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:04: [irq 0 disabled]
>pnp 00:04: [irq 8]
>pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:05: [io  0x0070-0x0073]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:06: [io  0x0061]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:07: [io  0x00f0-0x00ff]
>pnp 00:07: [irq 13]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:08: [io  0x03f8-0x03ff]
>pnp 00:08: [irq 4]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:09: [io  0x0378-0x037f]
>pnp 00:09: [irq 7]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
>pnp 00:0a: [mem 0xe4000000-0xe5ffffff]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0b: [mem 0x000d0000-0x000d3fff]
>pnp 00:0b: [mem 0x000f0000-0x000f7fff]
>pnp 00:0b: [mem 0x000f8000-0x000fbfff]
>pnp 00:0b: [mem 0x000fc000-0x000fffff]
>pnp 00:0b: [mem 0x7fff0000-0x7fffffff]
>pnp 00:0b: [mem 0xffff0000-0xffffffff]
>pnp 00:0b: [mem 0x00000000-0x0009ffff]
>pnp 00:0b: [mem 0x00100000-0x7ffeffff]
>pnp 00:0b: [mem 0xfec00000-0xfec00fff]
>pnp 00:0b: [mem 0xfee00000-0xfee00fff]
>pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [io  0x1000-0x107f] has been reserved
>system 00:01: [io  0x1080-0x10ff] has been reserved
>system 00:01: [io  0x1400-0x147f] has been reserved
>system 00:01: [io  0x1480-0x14ff] has been reserved
>system 00:01: [io  0x1800-0x187f] has been reserved
>system 00:01: [io  0x1880-0x18ff] has been reserved
>system 00:02: [io  0x04d0-0x04d1] has been reserved
>system 00:02: [io  0x0800-0x087f] has been reserved
>system 00:02: [io  0x0295-0x0314] has been reserved
>system 00:02: [io  0x0290-0x0294] has been reserved
>system 00:02: [io  0x0880-0x088f] has been reserved
>system 00:0a: [mem 0xe4000000-0xe5ffffff] has been reserved
>system 00:0b: [mem 0x000d0000-0x000d3fff] has been reserved
>system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
>system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
>system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
>system 00:0b: [mem 0x7fff0000-0x7fffffff] could not be reserved
>system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0b: [mem 0x00100000-0x7ffeffff] could not be reserved
>system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>pci 0000:01:00.0: BAR 6: assigned [mem 0xe3000000-0xe301ffff pref]
>pci 0000:00:03.0: PCI bridge to [bus 01-01]
>pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xe3ffffff]
>pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:10.0: PCI bridge to [bus 02-02]
>pci 0000:00:10.0:   bridge window [io  disabled]
>pci 0000:00:10.0:   bridge window [mem 0xe6000000-0xe60fffff]
>pci 0000:00:10.0:   bridge window [mem pref disabled]
>pci 0000:00:03.0: setting latency timer to 64
>pci 0000:00:10.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
>pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe3ffffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 1 [mem 0xe6000000-0xe60fffff]
>pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 1024 (order: 3, 32768 bytes)
>UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 5356k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1300007567.367:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 4018
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>intel_idle: MWAIT substates: 0x220
>intel_idle: does not run on family 6 model 15
>ERST: Table is not found!
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Registering the dns_resolver key type
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 3:79:222
>rtc_cmos 00:05: setting system clock to 2011-03-13 09:12:48 UTC (1300007568)
>BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>EDD information not available.
>Freeing unused kernel memory: 712k freed
>nash-hotplug (37): /proc/37/oom_adj is deprecated, please use /proc/37/oom_score_adj instead.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:0b.1: setting latency timer to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0b.1: debug port 1
>ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
>ehci_hcd 0000:00:0b.1: irq 23, io mem 0xe6107000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.37-desktop-3.mga ehci_hcd
>usb usb1: SerialNumber: 0000:00:0b.1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
>ohci_hcd 0000:00:0b.0: setting latency timer to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0b.0: irq 22, io mem 0xe6106000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.37-desktop-3.mga ohci_hcd
>usb usb2: SerialNumber: 0000:00:0b.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
>padlock: VIA PadLock not detected.
>Intel AES-NI instructions are not detected.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>sata_nv 0000:00:0e.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
>sata_nv 0000:00:0e.0: Using SWNCQ mode
>sata_nv 0000:00:0e.0: setting latency timer to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe600 irq 21
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe608 irq 21
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
>sata_nv 0000:00:0f.0: Using SWNCQ mode
>sata_nv 0000:00:0f.0: setting latency timer to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xeb00 irq 20
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xeb08 irq 20
>ata3: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: HPA detected: current 117229295, native 117231408
>ata1.00: ATA-8: OCZ-VERTEX2, 1.22, max UDMA/133
>ata1.00: 117229295 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX2      1.22 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117229295 512-byte logical blocks: (60.0 GB/55.8 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 2-2: new full speed USB device using ohci_hcd and address 2
>usb 2-2: New USB device found, idVendor=0a12, idProduct=0001
>usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: HPA detected: current 976771055, native 976773168
>ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
>ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:0:0: [sdb] Attached SCSI disk
>usb 2-6: new low speed USB device using ohci_hcd and address 3
>ata4: SATA link down (SStatus 0 SControl 300)
>pata_acpi 0000:00:0d.0: setting latency timer to 64
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>Btrfs loaded
>usb 2-6: New USB device found, idVendor=045e, idProduct=00cb
>usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-6: Product: Microsoft Basic Optical Mouse v2.0 
>usb 2-6: Manufacturer: Microsoft 
>input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.0/input/input0
>generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:0b.0-6/input0
>usb 2-7: new full speed USB device using ohci_hcd and address 4
>usb 2-7: New USB device found, idVendor=1532, idProduct=0109
>usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-7: Product: Razer Lycosa
>usb 2-7: Manufacturer: Razer
>input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.0/input/input1
>generic-usb 0003:1532:0109.0002: input,hidraw1: USB HID v1.10 Keyboard [Razer Razer Lycosa] on usb-0000:00:0b.0-7/input0
>input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.1/input/input2
>generic-usb 0003:1532:0109.0003: input,hidraw2: USB HID v1.10 Device [Razer Razer Lycosa] on usb-0000:00:0b.0-7/input1
>usb 2-8: new full speed USB device using ohci_hcd and address 5
>usb 2-8: New USB device found, idVendor=056a, idProduct=00d3
>usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-8: Product: CTH-661
>usb 2-8: Manufacturer: Wacom Co.,Ltd.
>EXT4-fs (dm-3): INFO: recovery required on readonly filesystem
>EXT4-fs (dm-3): write access will be enabled during recovery
>EXT4-fs (dm-3): recovery complete
>EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
>udev[160]: starting version 165
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button [PWRF]
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
>forcedeth 0000:00:14.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: acpi_idle registered with cpuidle
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>IT8718 SuperIO detected.
>cfg80211: Calling CRDA to update world regulatory domain
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>ppdev: user-space parallel port driver
>cfg80211: World regulatory domain updated:
>    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>rt61pci 0000:02:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>input: Wacom Bamboo 2FG 6x8 Pen as /devices/pci0000:00/0000:00:0b.0/usb2/2-8/2-8:1.0/input/input5
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>Registered led device: rt61pci-phy0::radio
>Registered led device: rt61pci-phy0::assoc
>input: Wacom Bamboo 2FG 6x8 Finger as /devices/pci0000:00/0000:00:0b.0/usb2/2-8/2-8:1.1/input/input6
>usbcore: registered new interface driver wacom
>wacom: v1.52:USB Wacom tablet driver
>forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:57:85:56
>forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>i2c i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c i2c-1: nForce2 SMBus adapter at 0x1c80
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
>HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
>hda_intel: Disable MSI for Nvidia chipset
>HDA Intel 0000:00:10.1: setting latency timer to 64
>SKU: Nid=0x0 sku_cfg=0x0000e601
>SKU: port_connectivity=0x0
>SKU: enable_pcbeep=0x1
>SKU: check_sum=0x00000000
>SKU: customization=0x00000000
>SKU: external_amp=0x0
>SKU: platform_type=0x0
>SKU: swap=0x0
>SKU: override=0x1
>nvidia: module license 'NVIDIA' taints kernel.
>Disabling lock debugging due to kernel taint
>ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
>nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
>nvidia 0000:01:00.0: setting latency timer to 64
>vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.29  Wed Dec  8 12:08:56 PST 2010
>EXT4-fs (dm-3): re-mounted. Opts: errors=remount-ro
>EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
>loop: module loaded
>vboxdrv: Found 2 processor cores.
>VBoxDrv: dbg - g_abExecMemory=ffffffffa1216700
>vboxdrv: fAsync=0 offMin=0x1c7 offMax=0x7bd
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 4.0.0 (interface 0x00160000).
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Bluetooth: L2CAP ver 2.15
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>cfg80211: Calling CRDA for country: US
>cfg80211: Regulatory domain changed to country: US
>    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>    (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>NET: Registered protocol family 17
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>FS-Cache: Loaded
>FS-Cache: Netfs 'nfs' registered for caching
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present
>pata_amd 0000:00:0d.0: version 0.4.1
>pata_amd 0000:00:0d.0: setting latency timer to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata5.01: NODEV after polling detection
>ata5.00: ATAPI: PHILIPS PBDV1640P, B3.4, max UDMA/33
>ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
>ata5.00: configured for UDMA/33
>scsi 4:0:0:0: CD-ROM            PHILIPS  PBDV1640P        B3.4 PQ: 0 ANSI: 5
>scsi 4:0:0:0: Attached scsi generic sg2 type 5
>ata6: port disabled. ignoring.
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sr 4:0:0:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 4:0:0:0: [sr0]  Sense Key : Illegal Request [current] 
>Info fld=0x341a6
>sr 4:0:0:0: [sr0]  Add. Sense: Illegal mode for this track
>sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 41 a6 00 00 02 00
>end_request: I/O error, dev sr0, sector 853656

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.37-desktop-3.mga (iurt@ecosse.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Tue Jan 25 14:16:42 UTC 2011
Command line: BOOT_IMAGE=/vmlinuz-2.6.37-desktop-3.mga root=/dev/mapper/kaze-mandriva ro splash=silent 3
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
 BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
 BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
 BIOS-e820: 00000000e4000000 - 00000000e6000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: GA-N650SLI-DS4L/GA-N650SLI-DS4L, BIOS F2 10/12/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CBFFF write-protect
  CC000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f4cc0] f4cc0
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007fff0000
 0000000000 - 007fe00000 page 2M
 007fe00000 - 007fff0000 page 4k
kernel direct mapping tables up to 7fff0000 @ 1fffc000-20000000
RAMDISK: 37ab5000 - 37ff0000
ACPI: RSDP 00000000000f65c0 00014 (v00 GBT   )
ACPI: RSDT 000000007fff3040 0003C (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: FACP 000000007fff30c0 00074 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: DSDT 000000007fff3180 04653 (v01 GBT    NVDAACPI 00001000 MSFT 0100000C)
ACPI: FACS 000000007fff0000 00040
ACPI: HPET 000000007fff7940 00038 (v01 GBT    NVDAACPI 42302E31 NVDA 00000098)
ACPI: MCFG 000000007fff79c0 0003C (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: APIC 000000007fff7840 00098 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: SSDT 000000007fff7a40 0015C (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 000000007fff7ed0 00275 (v01  PmRef    CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007fff0000
Initmem setup node 0 0000000000000000-000000007fff0000
  NODE_DATA [000000007ffeb000 - 000000007ffeffff]
 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007fff0
On node 0 totalpages: 524159
  DMA zone: 56 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3921 pages, LIFO batch:0
  DMA32 zone: 7112 pages used for memmap
  DMA32 zone: 513064 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:64000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82176 r8192 d24320 u524288
pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516985
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.37-desktop-3.mga root=/dev/mapper/kaze-mandriva ro splash=silent 3
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2052364k/2097088k available (4147k kernel code, 452k absent, 44272k reserved, 3174k data, 712k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 20971520 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2333.618 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4667.23 BogoMIPS (lpj=2333618)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20101013
ftrace: allocating 16306 entries in 64 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
Booting Node   0, Processors  #1
Brought up 2 CPUs
Total of 2 processors activated (9333.65 BogoMIPS).
devtmpfs: initialized
Time:  9:12:47  Date: 03/13/11
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe4000000-0xe5ffffff] (base 0xe4000000)
PCI: MMCONFIG at [mem 0xe4000000-0xe5ffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000007fff7e40 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci 0000:00:00.0: [10de:03a3] type 0 class 0x000600
pci 0000:00:00.1: [10de:03ac] type 0 class 0x000500
pci 0000:00:00.2: [10de:03aa] type 0 class 0x000500
pci 0000:00:00.3: [10de:03a9] type 0 class 0x000500
pci 0000:00:00.4: [10de:03ab] type 0 class 0x000500
pci 0000:00:00.5: [10de:03a8] type 0 class 0x000500
pci 0000:00:00.6: [10de:03b5] type 0 class 0x000500
pci 0000:00:00.7: [10de:03b4] type 0 class 0x000500
pci 0000:00:01.0: [10de:03ad] type 0 class 0x000500
pci 0000:00:01.1: [10de:03ae] type 0 class 0x000500
pci 0000:00:01.2: [10de:03af] type 0 class 0x000500
pci 0000:00:01.3: [10de:03b0] type 0 class 0x000500
pci 0000:00:01.4: [10de:03b1] type 0 class 0x000500
pci 0000:00:01.5: [10de:03b2] type 0 class 0x000500
pci 0000:00:01.6: [10de:03b3] type 0 class 0x000500
pci 0000:00:02.0: [10de:03b6] type 0 class 0x000500
pci 0000:00:02.1: [10de:03bc] type 0 class 0x000500
pci 0000:00:02.2: [10de:03ba] type 0 class 0x000500
pci 0000:00:03.0: [10de:03b7] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:09.0: [10de:0270] type 0 class 0x000500
pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601
pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05
pci 0000:00:0a.1: reg 20: [io  0x1c00-0x1c3f]
pci 0000:00:0a.1: reg 24: [io  0x1c80-0x1cbf]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0a.2: [10de:0272] type 0 class 0x000500
pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03
pci 0000:00:0b.0: reg 10: [mem 0xe6106000-0xe6106fff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03
pci 0000:00:0b.1: reg 10: [mem 0xe6107000-0xe61070ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101
pci 0000:00:0d.0: reg 20: [io  0xf000-0xf00f]
pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101
pci 0000:00:0e.0: reg 10: [io  0x09f0-0x09f7]
pci 0000:00:0e.0: reg 14: [io  0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 18: [io  0x0970-0x0977]
pci 0000:00:0e.0: reg 1c: [io  0x0b70-0x0b73]
pci 0000:00:0e.0: reg 20: [io  0xe600-0xe60f]
pci 0000:00:0e.0: reg 24: [mem 0xe6104000-0xe6104fff]
pci 0000:00:0f.0: [10de:0267] type 0 class 0x000101
pci 0000:00:0f.0: reg 10: [io  0x09e0-0x09e7]
pci 0000:00:0f.0: reg 14: [io  0x0be0-0x0be3]
pci 0000:00:0f.0: reg 18: [io  0x0960-0x0967]
pci 0000:00:0f.0: reg 1c: [io  0x0b60-0x0b63]
pci 0000:00:0f.0: reg 20: [io  0xeb00-0xeb0f]
pci 0000:00:0f.0: reg 24: [mem 0xe6105000-0xe6105fff]
pci 0000:00:10.0: [10de:026f] type 1 class 0x000604
pci 0000:00:10.1: [10de:026c] type 0 class 0x000403
pci 0000:00:10.1: reg 10: [mem 0xe6100000-0xe6103fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:14.0: [10de:0269] type 0 class 0x000680
pci 0000:00:14.0: reg 10: [mem 0xe6108000-0xe6108fff]
pci 0000:00:14.0: reg 14: [io  0xec00-0xec07]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:01:00.0: [10de:0400] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit]
pci 0000:01:00.0: reg 24: [io  0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:07.0: [1814:0302] type 0 class 0x000280
pci 0000:02:07.0: reg 10: [mem 0xe6000000-0xe6007fff]
pci 0000:00:10.0: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:10.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:10.0:   bridge window [mem 0xe6000000-0xe60fffff]
pci 0000:00:10.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:10.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:10.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff 
reserve RAM buffer: 000000007fff0000 - 000000007fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-1f]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x80000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x1000-0x107f]
pnp 00:01: [io  0x1080-0x10ff]
pnp 00:01: [io  0x1400-0x147f]
pnp 00:01: [io  0x1480-0x14ff]
pnp 00:01: [io  0x1800-0x187f]
pnp 00:01: [io  0x1880-0x18ff]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0022-0x003f]
pnp 00:02: [io  0x0044-0x005f]
pnp 00:02: [io  0x0062-0x0063]
pnp 00:02: [io  0x0065-0x006f]
pnp 00:02: [io  0x0074-0x007f]
pnp 00:02: [io  0x0091-0x0093]
pnp 00:02: [io  0x00a2-0x00bf]
pnp 00:02: [io  0x00e0-0x00ef]
pnp 00:02: [io  0x04d0-0x04d1]
pnp 00:02: [io  0x0800-0x087f]
pnp 00:02: [io  0x0295-0x0314]
pnp 00:02: [io  0x0290-0x0294]
pnp 00:02: [io  0x0880-0x088f]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io  0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io  0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x0378-0x037f]
pnp 00:09: [irq 7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0a: [mem 0xe4000000-0xe5ffffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x000d0000-0x000d3fff]
pnp 00:0b: [mem 0x000f0000-0x000f7fff]
pnp 00:0b: [mem 0x000f8000-0x000fbfff]
pnp 00:0b: [mem 0x000fc000-0x000fffff]
pnp 00:0b: [mem 0x7fff0000-0x7fffffff]
pnp 00:0b: [mem 0xffff0000-0xffffffff]
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x00100000-0x7ffeffff]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x1000-0x107f] has been reserved
system 00:01: [io  0x1080-0x10ff] has been reserved
system 00:01: [io  0x1400-0x147f] has been reserved
system 00:01: [io  0x1480-0x14ff] has been reserved
system 00:01: [io  0x1800-0x187f] has been reserved
system 00:01: [io  0x1880-0x18ff] has been reserved
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0800-0x087f] has been reserved
system 00:02: [io  0x0295-0x0314] has been reserved
system 00:02: [io  0x0290-0x0294] has been reserved
system 00:02: [io  0x0880-0x088f] has been reserved
system 00:0a: [mem 0xe4000000-0xe5ffffff] has been reserved
system 00:0b: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0x7fff0000-0x7fffffff] could not be reserved
system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0x7ffeffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
pci 0000:01:00.0: BAR 6: assigned [mem 0xe3000000-0xe301ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 02-02]
pci 0000:00:10.0:   bridge window [io  disabled]
pci 0000:00:10.0:   bridge window [mem 0xe6000000-0xe60fffff]
pci 0000:00:10.0:   bridge window [mem pref disabled]
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe3ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xe6000000-0xe60fffff]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5356k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1300007567.367:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4018
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x220
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 3:79:222
rtc_cmos 00:05: setting system clock to 2011-03-13 09:12:48 UTC (1300007568)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 712k freed
nash-hotplug (37): /proc/37/oom_adj is deprecated, please use /proc/37/oom_score_adj instead.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
ehci_hcd 0000:00:0b.1: irq 23, io mem 0xe6107000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.37-desktop-3.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 22, io mem 0xe6106000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.37-desktop-3.mga ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
padlock: VIA PadLock not detected.
Intel AES-NI instructions are not detected.
SCSI subsystem initialized
libata version 3.00 loaded.
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe600 irq 21
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe608 irq 21
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xeb00 irq 20
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xeb08 irq 20
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: HPA detected: current 117229295, native 117231408
ata1.00: ATA-8: OCZ-VERTEX2, 1.22, max UDMA/133
ata1.00: 117229295 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX2      1.22 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117229295 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-2: new full speed USB device using ohci_hcd and address 2
usb 2-2: New USB device found, idVendor=0a12, idProduct=0001
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: HPA detected: current 976771055, native 976773168
ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 2-6: new low speed USB device using ohci_hcd and address 3
ata4: SATA link down (SStatus 0 SControl 300)
pata_acpi 0000:00:0d.0: setting latency timer to 64
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
Btrfs loaded
usb 2-6: New USB device found, idVendor=045e, idProduct=00cb
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6: Product: Microsoft Basic Optical Mouse v2.0 
usb 2-6: Manufacturer: Microsoft 
input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.0/input/input0
generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:0b.0-6/input0
usb 2-7: new full speed USB device using ohci_hcd and address 4
usb 2-7: New USB device found, idVendor=1532, idProduct=0109
usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-7: Product: Razer Lycosa
usb 2-7: Manufacturer: Razer
input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.0/input/input1
generic-usb 0003:1532:0109.0002: input,hidraw1: USB HID v1.10 Keyboard [Razer Razer Lycosa] on usb-0000:00:0b.0-7/input0
input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.1/input/input2
generic-usb 0003:1532:0109.0003: input,hidraw2: USB HID v1.10 Device [Razer Razer Lycosa] on usb-0000:00:0b.0-7/input1
usb 2-8: new full speed USB device using ohci_hcd and address 5
usb 2-8: New USB device found, idVendor=056a, idProduct=00d3
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8: Product: CTH-661
usb 2-8: Manufacturer: Wacom Co.,Ltd.
EXT4-fs (dm-3): INFO: recovery required on readonly filesystem
EXT4-fs (dm-3): write access will be enabled during recovery
EXT4-fs (dm-3): recovery complete
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[160]: starting version 165
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:14.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: acpi_idle registered with cpuidle
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
IT8718 SuperIO detected.
cfg80211: Calling CRDA to update world regulatory domain
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
rt61pci 0000:02:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
input: Wacom Bamboo 2FG 6x8 Pen as /devices/pci0000:00/0000:00:0b.0/usb2/2-8/2-8:1.0/input/input5
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt61pci-phy0::radio
Registered led device: rt61pci-phy0::assoc
input: Wacom Bamboo 2FG 6x8 Finger as /devices/pci0000:00/0000:00:0b.0/usb2/2-8/2-8:1.1/input/input6
usbcore: registered new interface driver wacom
wacom: v1.52:USB Wacom tablet driver
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:57:85:56
forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c80
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:10.1: setting latency timer to 64
SKU: Nid=0x0 sku_cfg=0x0000e601
SKU: port_connectivity=0x0
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.29  Wed Dec  8 12:08:56 PST 2010
EXT4-fs (dm-3): re-mounted. Opts: errors=remount-ro
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
loop: module loaded
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa1216700
vboxdrv: fAsync=0 offMin=0x1c7 offMax=0x7bd
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.0 (interface 0x00160000).
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
    (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata5.01: NODEV after polling detection
ata5.00: ATAPI: PHILIPS PBDV1640P, B3.4, max UDMA/33
ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
ata5.00: configured for UDMA/33
scsi 4:0:0:0: CD-ROM            PHILIPS  PBDV1640P        B3.4 PQ: 0 ANSI: 5
scsi 4:0:0:0: Attached scsi generic sg2 type 5
ata6: port disabled. ignoring.
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0]  Sense Key : Illegal Request [current] 
Info fld=0x341a6
sr 4:0:0:0: [sr0]  Add. Sense: Illegal mode for this track
sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 41 a6 00 00 02 00
end_request: I/O error, dev sr0, sector 853656

Actions: View

Attachments on bug 357: 106 | 107 | 167 | 286