Attachment 10091 Details for Bug 22917 – scheduler, lspci and lsusb info

scheduler, lspci and lsusb info

ehci_info.txt (text/plain), 39.40 KB, created by Bit Twister on 2018-04-17 17:57:18 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Bit Twister

Created: 2018-04-17 17:57:18 CEST

Size: 39.40 KB

patch

obsolete

>$ cat /sys/block/sdg/queue/scheduler
>noop deadline [cfq]
>
>$ lspci -vvnn
>00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601]
>	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	NUMA node: 0
>	Capabilities: <access denied>
>
>00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	NUMA node: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000c000-0000cfff [size=4K]
>	Memory behind bridge: fe800000-fe8fffff [size=1M]
>	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff [size=256M]
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: <access denied>
>	Kernel driver in use: pcieport
>	Kernel modules: shpchp
>
>00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 17
>	NUMA node: 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: None
>	Memory behind bridge: fe900000-fe9fffff [size=1M]
>	Prefetchable memory behind bridge: None
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: <access denied>
>	Kernel driver in use: pcieport
>	Kernel modules: shpchp
>
>00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 19
>	NUMA node: 0
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	I/O behind bridge: 0000d000-0000dfff [size=4K]
>	Memory behind bridge: fea00000-feafffff [size=1M]
>	Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff [size=1M]
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: <access denied>
>	Kernel driver in use: pcieport
>	Kernel modules: shpchp
>
>00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	NUMA node: 0
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
>	I/O behind bridge: 0000e000-0000efff [size=4K]
>	Memory behind bridge: feb00000-febfffff [size=1M]
>	Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff [size=1M]
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: <access denied>
>	Kernel driver in use: pcieport
>	Kernel modules: shpchp
>
>00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
>	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 22
>	NUMA node: 0
>	Region 0: I/O ports at b000 [size=8]
>	Region 1: I/O ports at a000 [size=4]
>	Region 2: I/O ports at 9000 [size=8]
>	Region 3: I/O ports at 8000 [size=4]
>	Region 4: I/O ports at 7000 [size=16]
>	Region 5: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: <access denied>
>	Kernel driver in use: ahci
>
>00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
>	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	NUMA node: 0
>	Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci-pci
>	Kernel modules: ohci_pci
>
>00:12.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
>	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	NUMA node: 0
>	Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci-pci
>	Kernel modules: ohci_pci
>
>00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
>	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 17
>	NUMA node: 0
>	Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=256]
>	Capabilities: <access denied>
>	Kernel driver in use: ehci-pci
>	Kernel modules: ehci_pci
>
>00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
>	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	NUMA node: 0
>	Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci-pci
>	Kernel modules: ohci_pci
>
>00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
>	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	NUMA node: 0
>	Region 0: Memory at fe7f7000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci-pci
>	Kernel modules: ohci_pci
>
>00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
>	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 19
>	NUMA node: 0
>	Region 0: Memory at fe7ff400 (32-bit, non-prefetchable) [size=256]
>	Capabilities: <access denied>
>	Kernel driver in use: ehci-pci
>	Kernel modules: ehci_pci
>
>00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 3c)
>	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
>	NUMA node: 0
>	Capabilities: <access denied>
>	Kernel driver in use: piix4_smbus
>	Kernel modules: i2c_piix4, sp5100_tco
>
>00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383]
>	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	NUMA node: 0
>	Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: <access denied>
>	Kernel driver in use: snd_hda_intel
>	Kernel modules: snd_hda_intel
>
>00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
>	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	NUMA node: 0
>
>00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	NUMA node: 0
>	Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
>	I/O behind bridge: None
>	Memory behind bridge: None
>	Prefetchable memory behind bridge: None
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	NUMA node: 0
>	Capabilities: <access denied>
>
>00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	NUMA node: 0
>
>00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	NUMA node: 0
>
>00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	NUMA node: 0
>	Capabilities: <access denied>
>	Kernel driver in use: k10temp
>	Kernel modules: k10temp
>
>00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	NUMA node: 0
>
>01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] [1002:68f9] (prog-if 00 [VGA controller])
>	Subsystem: Diamond Multimedia Systems Device [1092:5450]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 24
>	NUMA node: 0
>	Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
>	Region 2: Memory at fe8e0000 (64-bit, non-prefetchable) [size=128K]
>	Region 4: I/O ports at c000 [size=256]
>	Expansion ROM at 000c0000 [disabled] [size=128K]
>	Capabilities: <access denied>
>	Kernel driver in use: radeon
>	Kernel modules: radeon
>
>01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] [1002:aa68]
>	Subsystem: Diamond Multimedia Systems Device [1092:aa68]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 27
>	NUMA node: 0
>	Region 0: Memory at fe8bc000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: <access denied>
>	Kernel driver in use: snd_hda_intel
>	Kernel modules: snd_hda_intel
>
>02:00.0 Network controller [0280]: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe [1814:3090]
>	Subsystem: Lite-On Communications Inc Device [11ad:6632]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 17
>	NUMA node: 0
>	Region 0: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
>	Capabilities: <access denied>
>	Kernel driver in use: rt2800pci
>	Kernel modules: rt2800pci
>
>03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
>	Subsystem: TP-LINK Technologies Co., Ltd. TG-3468 Gigabit PCI Express Network Adapter [7470:3468]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 25
>	NUMA node: 0
>	Region 0: I/O ports at d800 [size=256]
>	Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
>	Region 4: Memory at fdefc000 (64-bit, prefetchable) [size=16K]
>	Capabilities: <access denied>
>	Kernel driver in use: r8169
>	Kernel modules: r8169
>
>04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
>	Subsystem: Hewlett-Packard Company Pavilion p6774 [103c:2ab1]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 26
>	NUMA node: 0
>	Region 0: I/O ports at e800 [size=256]
>	Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
>	Region 4: Memory at fdffc000 (64-bit, prefetchable) [size=16K]
>	Capabilities: <access denied>
>	Kernel driver in use: r8169
>	Kernel modules: r8169
>
>$ lsusb  -
>Bus 002 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
>Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>Bus 005 Device 002: ID 10d5:0004 Uni Class Technology Co., Ltd PS/2 Converter
>Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>Bus 001 Device 005: ID 125f:db8a A-DATA Technology Co., Ltd.
>Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>Bus 004 Device 002: ID 046d:c214 Logitech, Inc. ATK3 (Attack III Joystick)
>Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
>$ lsusb  -v
>
>Bus 002 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.00
>  bDeviceClass            0 
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 
>  bMaxPacketSize0        64
>  idVendor           0x058f Alcor Micro Corp.
>  idProduct          0x6362 Flash Card Reader/Writer
>  bcdDevice            1.00
>  iManufacturer           1 Generic
>  iProduct                2 Mass Storage Device
>  iSerial                 3 058F63626476
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           32
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0x80
>      (Bus Powered)
>    MaxPower              250mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           2
>      bInterfaceClass         8 Mass Storage
>      bInterfaceSubClass      6 SCSI
>      bInterfaceProtocol     80 Bulk-Only
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x01  EP 1 OUT
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval               0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x82  EP 2 IN
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval               0
>Device Qualifier (for other device speed):
>  bLength                10
>  bDescriptorType         6
>  bcdUSB               2.00
>  bDeviceClass            0 
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 
>  bMaxPacketSize0        64
>  bNumConfigurations      1
>Device Status:     0x0000
>  (Bus Powered)
>
>Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.00
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  idVendor           0x1d6b Linux Foundation
>  idProduct          0x0002 2.0 root hub
>  bcdDevice            4.14
>  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ehci_hcd
>  iProduct                2 EHCI Host Controller
>  iSerial                 1 0000:00:13.2
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0004  1x 4 bytes
>        bInterval              12
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             6
>  wHubCharacteristic 0x000a
>    No power switching (usb 1.0)
>    Per-port overcurrent protection
>  bPwrOn2PwrGood       10 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0100 power
>   Port 3: 0000.0100 power
>   Port 4: 0000.0100 power
>   Port 5: 0000.0100 power
>   Port 6: 0000.0503 highspeed power enable connect
>Device Status:     0x0001
>  Self Powered
>
>Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  idVendor           0x1d6b Linux Foundation
>  idProduct          0x0001 1.1 root hub
>  bcdDevice            4.14
>  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ohci_hcd
>  iProduct                2 OHCI PCI host controller
>  iSerial                 1 0000:00:13.1
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval             255
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             3
>  wHubCharacteristic 0x0012
>    No power switching (usb 1.0)
>    No overcurrent protection
>  bPwrOn2PwrGood        2 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0100 power
>   Port 3: 0000.0100 power
>Device Status:     0x0001
>  Self Powered
>
>Bus 005 Device 002: ID 10d5:0004 Uni Class Technology Co., Ltd PS/2 Converter
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            0 
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 
>  bMaxPacketSize0         8
>  idVendor           0x10d5 Uni Class Technology Co., Ltd
>  idProduct          0x0004 PS/2 Converter
>  bcdDevice            0.01
>  iManufacturer           0 
>  iProduct                2 PS2 to USB AdapterA3
>  iSerial                 0 
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           59
>    bNumInterfaces          2
>    bConfigurationValue     1
>    iConfiguration          4 HID Mouse
>    bmAttributes         0xa0
>      (Bus Powered)
>      Remote Wakeup
>    MaxPower               98mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         3 Human Interface Device
>      bInterfaceSubClass      1 Boot Interface Subclass
>      bInterfaceProtocol      1 Keyboard
>      iInterface              0 
>        HID Device Descriptor:
>          bLength                 9
>          bDescriptorType        33
>          bcdHID               1.10
>          bCountryCode            0 Not supported
>          bNumDescriptors         1
>          bDescriptorType        34 Report
>          wDescriptorLength      65
>         Report Descriptors: 
>           ** UNAVAILABLE **
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0008  1x 8 bytes
>        bInterval              10
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        1
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         3 Human Interface Device
>      bInterfaceSubClass      1 Boot Interface Subclass
>      bInterfaceProtocol      2 Mouse
>      iInterface              0 
>        HID Device Descriptor:
>          bLength                 9
>          bDescriptorType        33
>          bcdHID               1.10
>          bCountryCode            0 Not supported
>          bNumDescriptors         1
>          bDescriptorType        34 Report
>          wDescriptorLength     110
>         Report Descriptors: 
>           ** UNAVAILABLE **
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x82  EP 2 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0008  1x 8 bytes
>        bInterval              10
>Device Status:     0x0000
>  (Bus Powered)
>
>Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  idVendor           0x1d6b Linux Foundation
>  idProduct          0x0001 1.1 root hub
>  bcdDevice            4.14
>  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ohci_hcd
>  iProduct                2 OHCI PCI host controller
>  iSerial                 1 0000:00:13.0
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval             255
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             3
>  wHubCharacteristic 0x0012
>    No power switching (usb 1.0)
>    No overcurrent protection
>  bPwrOn2PwrGood        2 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0303 lowspeed power enable connect
>   Port 3: 0000.0100 power
>Device Status:     0x0001
>  Self Powered
>
>Bus 001 Device 005: ID 125f:db8a A-DATA Technology Co., Ltd. 
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.10
>  bDeviceClass            0 
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 
>  bMaxPacketSize0        64
>  idVendor           0x125f A-DATA Technology Co., Ltd.
>  idProduct          0xdb8a 
>  bcdDevice           11.00
>  iManufacturer           1 ADATA
>  iProduct                2 ADATA USB Flash Drive
>  iSerial                 3 271112223006011C
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           32
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0x80
>      (Bus Powered)
>    MaxPower              500mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           2
>      bInterfaceClass         8 Mass Storage
>      bInterfaceSubClass      6 SCSI
>      bInterfaceProtocol     80 Bulk-Only
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x01  EP 1 OUT
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval               0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x82  EP 2 IN
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval               0
>Binary Object Store Descriptor:
>  bLength                 5
>  bDescriptorType        15
>  wTotalLength           22
>  bNumDeviceCaps          2
>  USB 2.0 Extension Device Capability:
>    bLength                 7
>    bDescriptorType        16
>    bDevCapabilityType      2
>    bmAttributes   0x00000006
>      BESL Link Power Management (LPM) Supported
>  SuperSpeed USB Device Capability:
>    bLength                10
>    bDescriptorType        16
>    bDevCapabilityType      3
>    bmAttributes         0x00
>    wSpeedsSupported   0x000c
>      Device can operate at High Speed (480Mbps)
>      Device can operate at SuperSpeed (5Gbps)
>    bFunctionalitySupport   2
>      Lowest fully-functional device speed is High Speed (480Mbps)
>    bU1DevExitLat           4 micro seconds
>    bU2DevExitLat           4 micro seconds
>Device Status:     0x0000
>  (Bus Powered)
>
>Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.00
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  idVendor           0x1d6b Linux Foundation
>  idProduct          0x0002 2.0 root hub
>  bcdDevice            4.14
>  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ehci_hcd
>  iProduct                2 EHCI Host Controller
>  iSerial                 1 0000:00:12.2
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0004  1x 4 bytes
>        bInterval              12
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             6
>  wHubCharacteristic 0x000a
>    No power switching (usb 1.0)
>    Per-port overcurrent protection
>  bPwrOn2PwrGood       10 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0503 highspeed power enable connect
>   Port 3: 0000.0100 power
>   Port 4: 0000.0100 power
>   Port 5: 0000.0100 power
>   Port 6: 0000.0100 power
>Device Status:     0x0001
>  Self Powered
>
>Bus 004 Device 002: ID 046d:c214 Logitech, Inc. ATK3 (Attack III Joystick)
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            0 
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 
>  bMaxPacketSize0         8
>  idVendor           0x046d Logitech, Inc.
>  idProduct          0xc214 ATK3 (Attack III Joystick)
>  bcdDevice            2.05
>  iManufacturer           1 Logitech
>  iProduct                2 Logitech Attack 3
>  iSerial                 0 
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           34
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0x80
>      (Bus Powered)
>    MaxPower               30mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         3 Human Interface Device
>      bInterfaceSubClass      0 
>      bInterfaceProtocol      0 
>      iInterface              0 
>        HID Device Descriptor:
>          bLength                 9
>          bDescriptorType        33
>          bcdHID               1.10
>          bCountryCode            0 Not supported
>          bNumDescriptors         1
>          bDescriptorType        34 Report
>          wDescriptorLength      74
>         Report Descriptors: 
>           ** UNAVAILABLE **
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0005  1x 5 bytes
>        bInterval              10
>Device Status:     0x0000
>  (Bus Powered)
>
>Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  idVendor           0x1d6b Linux Foundation
>  idProduct          0x0001 1.1 root hub
>  bcdDevice            4.14
>  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ohci_hcd
>  iProduct                2 OHCI PCI host controller
>  iSerial                 1 0000:00:12.1
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval             255
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             3
>  wHubCharacteristic 0x0012
>    No power switching (usb 1.0)
>    No overcurrent protection
>  bPwrOn2PwrGood        2 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0303 lowspeed power enable connect
>   Port 2: 0000.0100 power
>   Port 3: 0000.0100 power
>Device Status:     0x0001
>  Self Powered
>
>Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  idVendor           0x1d6b Linux Foundation
>  idProduct          0x0001 1.1 root hub
>  bcdDevice            4.14
>  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ohci_hcd
>  iProduct                2 OHCI PCI host controller
>  iSerial                 1 0000:00:12.0
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval             255
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             3
>  wHubCharacteristic 0x0012
>    No power switching (usb 1.0)
>    No overcurrent protection
>  bPwrOn2PwrGood        2 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0100 power
>   Port 3: 0000.0100 power
>Device Status:     0x0001
>  Self Powered

$ cat /sys/block/sdg/queue/scheduler
noop deadline [cfq]

$ lspci -vvnn
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601]
	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	NUMA node: 0
	Capabilities: <access denied>

00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	NUMA node: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff [size=4K]
	Memory behind bridge: fe800000-fe8fffff [size=1M]
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff [size=256M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	NUMA node: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: None
	Memory behind bridge: fe900000-fe9fffff [size=1M]
	Prefetchable memory behind bridge: None
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	NUMA node: 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff [size=4K]
	Memory behind bridge: fea00000-feafffff [size=1M]
	Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff [size=1M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	NUMA node: 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000e000-0000efff [size=4K]
	Memory behind bridge: feb00000-febfffff [size=1M]
	Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff [size=1M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	NUMA node: 0
	Region 0: I/O ports at b000 [size=8]
	Region 1: I/O ports at a000 [size=4]
	Region 2: I/O ports at 9000 [size=8]
	Region 3: I/O ports at 8000 [size=4]
	Region 4: I/O ports at 7000 [size=16]
	Region 5: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	NUMA node: 0
	Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:12.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	NUMA node: 0
	Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	NUMA node: 0
	Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	NUMA node: 0
	Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	NUMA node: 0
	Region 0: Memory at fe7f7000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 19
	NUMA node: 0
	Region 0: Memory at fe7ff400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 3c)
	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
	NUMA node: 0
	Capabilities: <access denied>
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco

00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383]
	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	NUMA node: 0
	Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
	Subsystem: Hewlett-Packard Company Device [103c:2ab1]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	NUMA node: 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	NUMA node: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
	I/O behind bridge: None
	Memory behind bridge: None
	Prefetchable memory behind bridge: None
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	NUMA node: 0
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	NUMA node: 0

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	NUMA node: 0

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	NUMA node: 0
	Capabilities: <access denied>
	Kernel driver in use: k10temp
	Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	NUMA node: 0

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] [1002:68f9] (prog-if 00 [VGA controller])
	Subsystem: Diamond Multimedia Systems Device [1092:5450]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 24
	NUMA node: 0
	Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at fe8e0000 (64-bit, non-prefetchable) [size=128K]
	Region 4: I/O ports at c000 [size=256]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: radeon
	Kernel modules: radeon

01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] [1002:aa68]
	Subsystem: Diamond Multimedia Systems Device [1092:aa68]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 27
	NUMA node: 0
	Region 0: Memory at fe8bc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

02:00.0 Network controller [0280]: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe [1814:3090]
	Subsystem: Lite-On Communications Inc Device [11ad:6632]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	NUMA node: 0
	Region 0: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: rt2800pci
	Kernel modules: rt2800pci

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
	Subsystem: TP-LINK Technologies Co., Ltd. TG-3468 Gigabit PCI Express Network Adapter [7470:3468]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 25
	NUMA node: 0
	Region 0: I/O ports at d800 [size=256]
	Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
	Region 4: Memory at fdefc000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
	Subsystem: Hewlett-Packard Company Pavilion p6774 [103c:2ab1]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 26
	NUMA node: 0
	Region 0: I/O ports at e800 [size=256]
	Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
	Region 4: Memory at fdffc000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

$ lsusb  -
Bus 002 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 10d5:0004 Uni Class Technology Co., Ltd PS/2 Converter
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 125f:db8a A-DATA Technology Co., Ltd.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 046d:c214 Logitech, Inc. ATK3 (Attack III Joystick)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

$ lsusb  -v

Bus 002 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x058f Alcor Micro Corp.
  idProduct          0x6362 Flash Card Reader/Writer
  bcdDevice            1.00
  iManufacturer           1 Generic
  iProduct                2 Mass Storage Device
  iSerial                 3 058F63626476
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              250mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.14
  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:13.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             6
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0503 highspeed power enable connect
Device Status:     0x0001
  Self Powered

Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            4.14
  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ohci_hcd
  iProduct                2 OHCI PCI host controller
  iSerial                 1 0000:00:13.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             3
  wHubCharacteristic 0x0012
    No power switching (usb 1.0)
    No overcurrent protection
  bPwrOn2PwrGood        2 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
Device Status:     0x0001
  Self Powered

Bus 005 Device 002: ID 10d5:0004 Uni Class Technology Co., Ltd PS/2 Converter
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x10d5 Uni Class Technology Co., Ltd
  idProduct          0x0004 PS/2 Converter
  bcdDevice            0.01
  iManufacturer           0 
  iProduct                2 PS2 to USB AdapterA3
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           59
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          4 HID Mouse
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      65
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     110
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10
Device Status:     0x0000
  (Bus Powered)

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            4.14
  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ohci_hcd
  iProduct                2 OHCI PCI host controller
  iSerial                 1 0000:00:13.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             3
  wHubCharacteristic 0x0012
    No power switching (usb 1.0)
    No overcurrent protection
  bPwrOn2PwrGood        2 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0303 lowspeed power enable connect
   Port 3: 0000.0100 power
Device Status:     0x0001
  Self Powered

Bus 001 Device 005: ID 125f:db8a A-DATA Technology Co., Ltd. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x125f A-DATA Technology Co., Ltd.
  idProduct          0xdb8a 
  bcdDevice           11.00
  iManufacturer           1 ADATA
  iProduct                2 ADATA USB Flash Drive
  iSerial                 3 271112223006011C
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           22
  bNumDeviceCaps          2
  USB 2.0 Extension Device Capability:
    bLength                 7
    bDescriptorType        16
    bDevCapabilityType      2
    bmAttributes   0x00000006
      BESL Link Power Management (LPM) Supported
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x000c
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   2
      Lowest fully-functional device speed is High Speed (480Mbps)
    bU1DevExitLat           4 micro seconds
    bU2DevExitLat           4 micro seconds
Device Status:     0x0000
  (Bus Powered)

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.14
  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:12.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             6
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0503 highspeed power enable connect
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
Device Status:     0x0001
  Self Powered

Bus 004 Device 002: ID 046d:c214 Logitech, Inc. ATK3 (Attack III Joystick)
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x046d Logitech, Inc.
  idProduct          0xc214 ATK3 (Attack III Joystick)
  bcdDevice            2.05
  iManufacturer           1 Logitech
  iProduct                2 Logitech Attack 3
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower               30mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      74
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0005  1x 5 bytes
        bInterval              10
Device Status:     0x0000
  (Bus Powered)

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            4.14
  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ohci_hcd
  iProduct                2 OHCI PCI host controller
  iSerial                 1 0000:00:12.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             3
  wHubCharacteristic 0x0012
    No power switching (usb 1.0)
    No overcurrent protection
  bPwrOn2PwrGood        2 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0303 lowspeed power enable connect
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
Device Status:     0x0001
  Self Powered

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            4.14
  iManufacturer           3 Linux 4.14.30-desktop-3.mga6 ohci_hcd
  iProduct                2 OHCI PCI host controller
  iSerial                 1 0000:00:12.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             3
  wHubCharacteristic 0x0012
    No power switching (usb 1.0)
    No overcurrent protection
  bPwrOn2PwrGood        2 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
Device Status:     0x0001
  Self Powered

Actions: View

Attachments on bug 22917: 10085 | 10091